Technical Parameters Parameter Category Description / Value Brand & Series Eaton, ETR4 Series Model Number ETR4-70-A Poles 3-Pole Trip Class Class 10 Current Setting Range 53 - 70 A Rated Operational Voltage (Ue) 690V AC Rated Insulation Voltage (Ui) 1000V AC Ambient Temperature Range -25°C to +60°C (Derating may apply above +50°C) Standards Compliance IEC/EN 60947-4-1, UL 508, CSA C22.2 No. 14 Mounting Snap-on mounting to compatible Eaton DIL contactors Auxiliary Contacts 1 NO (95-96) + 1 NC (97-98) - Convertible Reset Mode Manual reset (Automatic reset optional)

Technical Parameters Parameter Category Description / Value Brand & Series Eaton, DILM Series Model Number DILM65C Rated Operational Current (Ie) 65 A at AC-3, 400V Thermal Current (Ith) 65 A Poles (Main Circuit) 3 (Normally Open) Auxiliary Contacts Typically 1 NO (Normally Open) - Fixed (configurable with additional blocks) Rated Operational Voltage (Ue) Up to 690V AC Control Coil Voltage "C" denotes a standard DC voltage range. The specific voltage must be ordered (e.g., 24V DC, 110V DC). Utilization Categories AC-3: Squirrel cage motors: Starting, switching off during running AC-1: Non-inductive or slightly inductive loads Motor Rating (at 400V AC) 37 kW / 50 HP Mechanical Life ~ 10 million operations Electrical Life (AC-3) ~ 1 million operations Mounting Standard 35mm DIN Rail (EN 60715) or screw mounting Standards Compliance IEC/EN 60947-4-1, UL 508, CSA C22.2 No. 14 Terminal Type Screw Clamp

Technical Parameters Parameter Category Description / Value Brand & Series Eaton, M22 Series Model Number M22-R4K7 Sensor Type Inductive Proximity Sensor Housing Material Typically Nickel-plated brass or Stainless Steel Thread Size M22 x 1.5 Connection Type Pre-wired cable (Specific length varies) Integrated Resistor 4.7 kΩ Sensing Distance 5 mm (Standard for M22 inductive sensors) Output Type Analog or Special Configuration Supply Voltage 10-30V DC Protection Degree IP67 Standards Compliance IEC 60947-5-2

Technical Parameters Parameter Category Description / Value Brand & Series Eaton, NZM Series Model Number NZMN2-A200 Number of Poles 2-Pole Rated Current 200 A (Frame Size) Rated Operational Voltage (Ue) Up to 480V AC Rated Insulation Voltage (Ui) 690V AC Rated Ultimate Breaking Capacity (Icu) Typically 25 kA / 35 kA at 480V AC (Confirm with specific datasheet) Trip Unit Type Type A - Adjustable Electronic Trip Unit Protection Functions L - Long-time Delay (Overload) S - Short-time Delay (Short-Circuit) I - Instantaneous (Short-Circuit) Standards Compliance IEC 60947-2

Technical Parameters Parameter Category Description / Value Brand & Series Eaton, EMT6 Series Model Number EMT6-K Power Supply Voltage 24-240V AC/DC (Wide range, auto-sensing) Output Relay DPDT (2 CO) - 2 Changeover contacts Contact Rating: Typically 8A @ 250V AC Timing Ranges Multiple ranges selectable (e.g., from 0.05 seconds up to 100 hours) Functions Specific set of timing functions selectable (e.g., On-delay, Off-delay, Interval, Flasher, etc. - defined by the "K" variant) Accuracy ±0.5% of set time ± 20 ms (typical for digital timers) Mounting DIN Rail (35mm) Display / Indication LED Status Indicators (Power, Output state) Standards Compliance IEC/EN 61812-1, UL 508, CSA C22.2 No. 14

Technical Parameters Parameter Category Description / Value Brand & Series Eaton, M22 Series Model Number M22-R10K Sensor Type Inductive Proximity Sensor Housing Material Typically Nickel-plated brass or Stainless Steel Thread Size M22 x 1.5 Connection Type Pre-wired cable (Specific length varies) Integrated Resistor 10 kΩ Sensing Distance 5 mm (Standard for M22 inductive sensors) Output Type Analog or Special Configuration Supply Voltage 10-30V DC Current Consumption Typically ≤ 15 mA Switching Frequency Typically ≤ 500 Hz Hysteresis Typically ≤ 10% of sensing distance Protection Degree IP67 Ambient Temperature -25°C to +70°C Standards Compliance IEC 60947-5-2

Technical Parameters Parameter Category Description / Value Brand & Series Eaton, P3 Series Model Number P3-63-63/EA/SVB Rated Current (In) 63 A Number of Poles 3-Pole Tripping Characteristic Type C (Instantaneous trip: 5-10 x In) Rated Operational Voltage (Ue) 400/415V AC (Three-Phase) Rated Insulation Voltage (Ui) 500V AC Breaking Capacity (Icn) Typically 10 kA / 15 kA (Please confirm with specific catalog) Auxiliary Function EA - Alarm Switch (Signals trip condition via a separate contact) Terminal Type SVB - Shrouded Terminal Barrier (Finger Protection) Mounting Standard 35mm DIN Rail (EN 60715) Standards Compliance IEC/EN 60898-1

Technical Parameters Parameter Category Description / Value Brand & Series Eaton, SVB Series Model Number SVB-SW-T0 Accessory Type Shrouded Terminal Barrier Function Finger Protection / Touch Protection Compatibility Designed for specific Eaton switch disconnectors (exact compatible models to be verified) Protection Degree Provides IP20 protection when properly installed Material Thermoplastic (Typically UL94 V-0 rated for flame retardancy) Color Typically Orange or safety color for high visibility Mounting Snap-on installation to compatible Eaton devices Standards Compliance IEC/EN 60529 (IP Code), relevant parts of IEC/EN 60947 series

Technical Parameters Parameter Category Description / Value Brand & Series Eaton, T0 Series Model Number T0-4-15682/I1/SVB-SW Rated Operational Current (Ie) 63 A (at AC-22/AC-23) Number of Poles 4-Pole (3 phases + neutral) Rated Operational Voltage (Ue) 690V AC Rated Insulation Voltage (Ui) 750V AC Rated Impulse Withstand Voltage (Uimp) 8 kV Utilization Categories AC-22 (Switching mixed resistive and inductive loads) AC-23 (Switching motor loads) Auxiliary Contacts I1 - Specific auxiliary contact configuration (e.g., 1 NO + 1 NC) Terminal Type SVB-SW - Shrouded Terminal Barrier for switch disconnectors Operation Type Rotary Handle Operation Mechanical Life ~ 20,000 operations Electrical Life ~ 5,000 operations (at rated current) Mounting DIN Rail (35mm) Standards Compliance IEC/EN 60947-3

Technical Parameters Parameter Category Description / Value Brand & Series Eaton, T5B Series Model Number T5B-3-8401 Rated Operational Current (Ie) 125 A (at AC-23) Number of Poles 3-Pole Rated Operational Voltage (Ue) 690V AC Rated Insulation Voltage (Ui) 750V AC Rated Impulse Withstand Voltage (Uimp) 8 kV Utilization Categories AC-22 (Switching mixed resistive and inductive loads) AC-23 (Switching motor loads) Breaking Capacity Typically 30 kA (at 400V AC) Operation Type Rotary Handle Operation Mechanical Life ~ 10,000 operations Electrical Life ~ 1,500 operations (at rated current) Mounting Panel Mount Standards Compliance IEC/EN 60947-3