The Schneider Electric iPRU 20 4P 20KA is a Type 2 / Class II Surge Protective Device (SPD) from the Acti 9 iPRU series. It is designed to protect low-voltage electrical installations (up to 400V AC) against transient overvoltages caused by indirect or remote lightning strikes and switching operations. The "20" indicates a 20kA per mode nominal discharge current, and "4P" denotes a 4-pole (3P+N) protection mode configuration.

The Schneider Electric NSX100F 4P 80A 600V is a 4-pole, 80A, fixed-type molded case circuit breaker (MCCB) from the Compact NSX series, specifically designed for applications requiring a 600V rated voltage. It provides reliable protection for three-phase + neutral circuits in industrial and commercial electrical systems where higher distribution voltages are standard.

The Schneider Electric WATSNB-250/250-4CBR-X is a 250A, 4-pole (3P+N), Closed Transition (Parallel) Automatic Transfer Switch (ATS). It is a high-performance, microprocessor-controlled unit designed for seamless and reliable power source transfer between two supplies (typically Main/Utility and Backup/Generator) in critical power applications. The "Closed Transition" (CBR) feature enables "make-before-break" switching, allowing uninterrupted transfer without power interruption to the load.

The Schneider Electric NSX400F DC 3P 400A is a 3-pole, 400A, fixed-type molded case circuit breaker (MCCB) from the Compact NSX series, specifically designed for direct current (DC) applications. It provides reliable protection for DC circuits against overloads and short circuits in demanding environments such as photovoltaic (PV) systems, battery storage, DC traction, and industrial DC power distribution.

The Schneider Electric Acti 9 iC65H is a 3-pole, 20A, D-curve miniature circuit breaker (MCB) from the high-performance iC65 series. It is specifically designed to provide reliable protection against overloads and short-circuits for circuits with high inrush currents, such as those powering transformers, solenoid valves, and certain types of motors and lighting.

The Schneider Electric LC1D18 BD is a 18A rated, industrial-grade electromechanical contactor from the renowned Telemecanique D-Line series. Designed for 24V DC coil operation, it is used for remote control and switching of electrical power circuits, primarily for motor control but also applicable to resistive, capacitive, and lighting loads.

The Schneider Electric NSX100M N 3P 50A is a 3-pole, 50-ampere, Compact NSX series molded case circuit breaker (MCCB) with a standard thermal-magnetic (TM) trip unit. It is a core component of the Compact NSX range, designed for reliable circuit protection, isolation, and control in commercial, industrial, and infrastructure electrical distribution systems. Its compact design offers high performance in a reduced footprint.

The Schneider Electric CVS400F is a 400A frame molded case circuit breaker equipped with a Vigi MB earth leakage protection module and TM400D thermal-magnetic trip unit, configured as 4P3D (4 poles with 3 protected phases and a switched neutral). This integrated solution provides comprehensive protection against overloads, short circuits, and earth leakage faults in three-phase distribution systems.

Schneider Electric iSCB1 is a 25L1 frame, 4-pole Air Circuit Breaker (ACB) from the Masterpact iSCB series. Designed as a compact, intelligent air circuit breaker, it provides advanced protection, control, and monitoring capabilities for low-voltage power distribution systems in commercial, industrial, and infrastructure applications.

The Schneider Electric WG is a 3-pole, 315A Air Circuit Breaker (ACB) designed for main distribution and protection in commercial, industrial, and infrastructure applications. As part of the Masterpact series, it provides high-performance protection for critical power distribution systems with advanced functionality and reliability.