Products
Products
ABB Allen-Bradley ADEPT ALSTOM
All Categories
AMAT B&R BACHMANN BENTLY Bosch Rexroth BAILEY CUTLER-HAMMER DEIF DANAHER Enterasys Extreme EATON ELAU EMERSON EPRO FANUC servo motor FOXBORO GE HIMA Honeywell ICSTriplex IFM Kollmorgen SIEMENS Schneider WOODWARD YASKAWA Omron YOKOGAWA MOOG MOTOROLA NI RELIANCE Rexroth SEW-EURODRIVE TRICONEX Weidmueller Mitsubishi SICK FISHER
home
schneider
WATSGB250/4X 250A
The Schneider Electric WATSGB250/4X is a 4-pole (3P+N), 250A heavy-duty manual changeover switch from the industrial-grade WATSGB series. Designed for robust and reliable operation, it enables the safe manual transfer of electrical loads between two independent three-phase power sources, such as the main grid and a backup generator.

More details >> Request a Quote >>
schneider
WATSGA-100/4R
The Schneider Electric WATSGA-100/4R is a 4-pole (3P+N), 100A manual changeover switch designed for safe and reliable manual transfer between two independent three-phase AC power sources. It provides a simple, robust, and cost-effective solution for applications where backup power is available but automatic transfer is not required.

More details >> Request a Quote >>
schneider
WATSGA160/4R
The Schneider Electric WATSGA160/4R is a 4-pole (3P+N), 160A manual changeover switch from the reliable WATSGA series. It is designed for safe and dependable manual transfer of electrical loads between two separate three-phase power sources, such as a main utility supply and a backup generator.

More details >> Request a Quote >>
schneider
WATSGA320/4
The Schneider Electric WATSGA320/4 is a three-phase, 4-pole (3P+N) manual changeover switch with a rated current of 320A. Designed for reliable power source transfer in low-voltage distribution systems, it allows an operator to manually select between two independent AC power supplies (e.g., Utility and Generator) while ensuring complete electrical isolation.

More details >> Request a Quote >>
schneider
WATSGB400/4R
The Schneider Electric WATSGB400/4R is a high-current, three-phase manual changeover switch designed for safely transferring electrical loads between two independent power sources. With a rated current of 400A and a 4-pole (3P+N) configuration, it is built for robust performance in critical power distribution systems.

More details >> Request a Quote >>
schneider
WATSGA250/4R
The Schneider Electric WATSGA250/4R is a three-phase, 4-wire, manual changeover switch with a rated current of 250A. Designed for power supply transfer applications, it allows safe and reliable manual switching between two independent AC power sources (e.g., Main Grid and Generator) in low-voltage distribution systems.

More details >> Request a Quote >>
schneider
IDPNA VIGI+
The Schneider Electric Acti 9 iDPNa Vigi+ is a premium range of 1P+N (Single-Pole + Neutral) Residual Current Circuit Breakers (RCBOs). It combines a high-performance miniature circuit breaker (MCB) with an advanced immunized electronic residual current device (RCD) in a compact, single-module design.

More details >> Request a Quote >>
schneider
IDPNA 16A
The Schneider Electric iDPNa is a 16 Amp, 1P+N (Single-Pole + Neutral) Residual Current Circuit Breaker (RCBO) from the Acti 9 series. This compact device integrates the functions of a miniature circuit breaker (MCB) for overload and short-circuit protection, and a residual current device (RCD) for earth leakage protection into a single modular unit.

More details >> Request a Quote >>
schneider
ESIIM 3P+N 10KA
The Schneider Electric Esylim is a 3P+N (Type 2) Surge Protective Device (SPD) with a 10kA nominal discharge current (In) per phase. Designed for main distribution boards in low-voltage AC systems (230/400V), it provides protection against transient overvoltages from indirect lightning strikes and electrical switching for three-phase installations with neutral.

More details >> Request a Quote >>
schneider
EZD 3P 630E
The Schneider Electric EZD 630E is a 3-Pole, 630A Moulded Case Circuit Breaker (MCCB) designed for main circuit protection in industrial and commercial low-voltage distribution systems. With its "E" performance level and compact design, it provides reliable protection against overloads and short-circuits.

More details >> Request a Quote >>
1 2
···
250 251 252 253 254 255 256
···
439 440
Related products
EASY822-DC-TC
Key Parameters Category Description / Value Product Line Eaton EASY (Smart Relays) Series EASY800 Model / CPU EASY822 Power Supply DC (Typical rating: 24 V DC. Must be verified on the device). Integrated Function PID Temperature Controller (as indicated by "TC") Digital Inputs 12 (The exact number and type - AC/DC sourcing/sinking - depends on the specific -DC variant). Digital Outputs 8 (Typically relay outputs). Analog Inputs 2 for temperature sensors (e.g., thermocouple Type J/K or Pt100/1000). Analog Output 1 for the PID control output (e.g., 0-10V or 0/4-20mA). Programming Via EASY-SOFT software or directly on the device using the built-in display and buttons. Display Integrated LCD for showing values, status, and messages. Mounting Snap-on mounting on 35 mm top-hat rail (DIN rail). Communication Optional communication modules (e.g., for Ethernet, AS-Interface, IO-Link) can be added.
ABB PM554-T A0 PLC Automation Controller, High Performance for Industrial Control -

The ABB PM554-T A0 is a state-of-the-art PLC Automation CPU designed for high-performance, efficient control systems in a wide range of industrial applications. It seamlessly integrates into existing automation networks, offering unparalleled reliability and robustness.
Bently Nevada 330851-05-000-040-50-01-05 Proximity Transducer: Precision Measurement for Industrial Control -

The Bently Nevada 330851-05-000-040-50-01-05 Proximity Transducer is a high-precision sensor designed for industrial control systems, offering unparalleled accuracy and reliability in detecting close objects without physical contact.