The Schneider Electric TCSESM163F23F0 is a ConneXium managed Ethernet switch designed for industrial networking applications requiring advanced traffic management and network reliability . It is part of the Modicon Networking range and supports the Transparent Ready concept

The Schneider Electric BMEH584040 is a high-performance redundant hot-standby (HSBY) processor module from the Modicon M580 ePAC (Programmable Automation Controller) range . It is designed for medium to large process applications requiring maximum system availability and minimal downtime . By supporting hot-standby redundancy configurations, it ensures continuous operation in critical industrial environments

The Schneider Electric TCSESU043F1N0 is a ConneXium unmanaged Ethernet switch designed to connect single devices or complete network segments in industrial environments . It supports both Ethernet 10Mbps and Fast Ethernet 100Mbps in accordance with IEEE standard 802.3 using copper and fiber optic technology

The Schneider Electric XPSTSA5142P is a Preventa XPSTS series safety time delay module designed for applications requiring interlocking on high inertia machinery . It provides configurable time delays for safety functions, ensuring safe machine stopping or start-up sequences . The module features microprocessor-based technology with a redundancy principle to provide advanced safety functions

The Schneider Electric XPSAXE5120P is a Preventa XPS AXE series safety module specifically designed for monitoring emergency stop circuits (conforming to EN/ISO 13850 and EN/IEC 60204-1) and safety switch interlocks on protective devices (conforming to EN/ISO 14119) . It is a compact, 22.5mm wide module that mounts on a standard 35mm DIN rail

The Schneider Electric TCSEGPA23F14F is a Profibus DP V1 remote master (PRM) module that acts as a gateway between an Ethernet Modbus TCP/IP network and a Profibus DP fieldbus . It is designed to provide Profibus master capability to Modicon PLCs, specifically the Premium, Quantum, M580, and M340 series

The Schneider Electric SH31001P12A2100 is a high-performance servo motor from the Lexium SH3 series, designed for integration with the PacDrive 3 automation system . It is a 4-pole, three-phase synchronous motor featuring an absolute multi-turn SinCos Hiperface® encoder with 128 periods for precise speed and position feedback

The Schneider Electric SH30703P12A2100 is a high-performance servo motor from the Lexium 52 series, designed for integration with the PacDrive 3 automation system . It is a 3-pole, three-phase motor featuring an absolute multi-turn SinCos Hiperface® encoder with 128 periods for precise speed and position feedback . The motor is equipped with a parallel keyed shaft and does not include a holding brake . It features a rotatable right-angled connector for flexible electrical installation and boasts an IP65 protection rating, making it resistant to dust and water jets

The Schneider ElectricSH30703P11A2100 is a high-performance brushless servo motor from the Lexium SH3 series, part of the PacDrive 3 automation solution . This 70mm flange size motor features a 3-pole design and has a low rotor moment of inertia (0.58 kg.cm²), which enables high acceleration capability for dynamic applications

The Schneider ElectricSH30702P12A2100 is a high-performance brushless servo motor from the Lexium SH3 series, part of the PacDrive 3 automation solution . This 70mm flange size motor features a 3-pole design and a low rotor inertia of 0.41 kg.cm², which enables high acceleration capability for dynamic applications