Specifications Parameter Specification Brand Schneider Electric Series TeSys D Model / Type LC1D95CC5C Device Type Magnetic Contactor Number of Poles 3‑Pole (3 main NO power contacts) Rated Operational Current (Ie) 95 A (AC‑3) Rated Operational Voltage (Ue) ≤ 690 V AC Utilization Category AC‑1 / AC‑3 / AC‑4 Auxiliary Contacts 1 NO + 1 NC Coil Voltage Options DC or AC variants (e.g., 24 V DC, 110–415 V AC) Rated Insulation Voltage (Ui) 1000 V AC Rated Impulse Withstand Voltage (Uimp) 8 kV Motor Power Rating (AC‑3) Up to 45 kW @ 380–400 V AC Contact Configuration 3 main NO + auxiliary contacts Mechanical Life ~10,000,000 operations Electrical Life (AC‑3) ~1,000,000 operations Operating Frequency Up to ~3600 operations/hour Mounting DIN‑rail or panel mount Connection Type Screw / clamp terminals Standards Compliance IEC/EN 60947‑4‑1, UL, CSA, CCC Protection Degree IP20 Operating Temperature Range −40 °C to 60 °C Pollution Degree 3

The Schneider Electric WATSN60/4AA is a dual power automatic transfer switch (ATS) designed for three‑phase low‑voltage power distribution systems. It enables reliable switching between two independent power sources — such as the main utility supply and a backup generator — to maintain continuous power to critical loads during supply interruptions.

The Schneider Electric ComPacT NS1000NA is a 4-pole manual switch disconnector designed for low-voltage power distribution systems. It is part of the ComPacT NS range, built for reliable circuit control and isolation in industrial and commercial electrical panels.

The Schneider Electric WATSG250/4A Dual Power Automatic Transfer Switch is a robust industrial transfer switch designed for three-phase electrical systems.

The Schneider Electric A9L65102 is a modular Type 2 surge protection cartridge designed for use with surge protection devices in electrical distribution panels. It helps protect low-voltage installations and connected equipment from transient overvoltages and surges caused by lightning strikes or switching events.

The Schneider Electric iC65N 1-Pole D40A Miniature Circuit Breaker is a compact, manual protective device designed for low-voltage electrical distribution systems.

The Schneider Electric WATSGA-400/4R is a dual power automatic transfer switch (ATS) designed for industrial and commercial power distribution systems. It provides reliable automatic switching between a primary (main) power source and a secondary (backup) power source, ensuring uninterrupted power supply during outages or utility failures. The unit is built to IEC standards and is suitable for three-phase AC systems. The switch supports both automatic and manual transfer modes, with multiple operational features to ensure smooth and reliable power transitions in critical applications.

The Schneider Electric MT25 H1 3-Pole Air Circuit Breaker is a low-voltage power circuit breaker designed for protection and control of electrical distribution systems in industrial and commercial installations.

The Schneider Electric TeSys K Control Relay CA3KN31BD3 is a compact industrial control relay designed for use in electrical control circuits. It features a 24 V DC standard coil and four contact poles (three normally open and one normally closed) capable of switching up to 10 A at 690 V AC/DC in control applications.

The Schneider Electric EZ7 RCBO is a Residual Current Circuit Breaker with Overcurrent Protection designed for DIN-rail mounting. It combines overcurrent protection (like a miniature circuit breaker) and residual current (earth leakage) protection in a single compact modular device. It is used in electrical distribution systems to protect circuits from overload, short-circuit, and earth leakage current faults, improving safety for people and electrical installations.