Key Technical Parameters General Ordering Data Parameter Value Order No. 7760054306 Type ACT20P-VM-AO-S Product family ACT20P Version Signal converter/isolator, Analogue isolating amplifier GTIN (EAN) 6944169749087 Packaging unit 1 pc(s) Dimensions and Weight Parameter Value Width 22.5 mm (0.886 inch) Height 119.2 mm (4.693 inch) Depth 114.3 mm (4.5 inch) Net weight 110 g Temperature Ratings Parameter Value Operating temperature -20 °C … +60 °C Storage temperature -40 °C … +85 °C Humidity 5 … 95%, no condensation Operating altitude ≤ 2000 m Input Specifications Parameter Value Number of inputs 1 Input signal UDC, UAC Effective value (sinusoidal only) 40-60 Hz Input resistance 1 MΩ ±5% Input voltage (configurable) 0…30 V DC, 0…60 V DC, 0…150 V DC, 0…300 V DC, 0…440 V DC, 0…660 V DC, 0…60 V AC, 0…144 V AC, 0…300 V AC, 0…440 V AC Output Specifications Parameter Value Number of outputs 1 Output type Active (connected control must be passive) Output voltage 0...10 V Output current 0...20 mA, 4...20 mA Load impedance (voltage) ≥ 10 kΩ Load impedance (current) ≤ 500 Ω Power Supply Parameter Value Supply voltage 24…240 V UC (±10%) Power consumption ≤ 100 mA @ 24 V DC, ≤ 120 mA @ 24 V AC Nominal power consumption 2 VA Performance Parameter Value Accuracy 0.5 % FSR Step response time < 300 ms Temperature coefficient ≤ 200 ppm/K Insulation Coordination Parameter Value Galvanic isolation 3-way isolator (input/output/supply) Insulation voltage 2 kV AC input/output, 2 kV AC input/supply, 1.5 kV AC output/supply Impulse withstand voltage 4 kV (1.2/50 μs) input-output, 4 kV (1.2/50 μs) input/supply, 2.5 kV (1.2/50 μs) output/supply Rated voltage 600 V input/output, 600 V input/supply, 300 V output/supply Pollution severity 2 Surge voltage category III Protection degree IP20 EMC standards EN 61326-1, EN 61000-6-2, EN 61000-6-4 Connection Data Parameter Value Connection type Screw connection Tightening torque, min. 0.4 Nm Tightening torque, max. 0.6 Nm Clamping range, rated connection 1.5 mm² Clamping range, min. 0.5 mm² Clamping range, max. 2.5 mm² Wire cross-section AWG, min. AWG 26 Wire cross-section AWG, max. AWG 12 Configuration Parameter Value Configuration method With FDT/DTM software "WI-Manager" Configuration adapter required CBX200 USB (Order No. 8978580000) Mounting Parameter Value Mounting rail TS 35 Reliability Parameter Value MTTF 140 years SIL in compliance with IEC 61508 None Approvals and Certifications Parameter Value cURus Certificate No. E469563 ROHS Compliant with exemption REACH SVHC Lead 7439-92-1