Products
Products
ABB Allen-Bradley ADEPT ALSTOM
All Categories
AMAT B&R BACHMANN BENTLY Bosch Rexroth BAILEY CUTLER-HAMMER DEIF DANAHER Enterasys Extreme EATON ELAU EMERSON EPRO FANUC servo motor FOXBORO GE HIMA Honeywell ICSTriplex IFM Kollmorgen SIEMENS Schneider WOODWARD YASKAWA Omron YOKOGAWA MOOG MOTOROLA NI RELIANCE Rexroth SEW-EURODRIVE TRICONEX Weidmueller Mitsubishi SICK FISHER
home
___fisher
FISHER™ CAV III
Technical Parameters Parameter Specification Model Fisher CAV III Type High Capacity, Constant Bleed Volume Booster / Relay Pressure Ratio 1:1 (Standard) Supply Pressure Range Up to 150 psig (10.3 bar) Input & Output Signal Range Typically 3 to 15 psig (0.2 to 1.0 bar) or 3 to 27 psig (0.2 to 1.9 bar)，取决于弹簧范围。 Constant Bleed Rate Approximately 0.5 SCFM (0.85 m³/hr). Flow Capacity (Cv) Approximately 3.0 (非常高) Body Material Aluminum Connection Size 1/4" NPT (Input, Output, and Supply) Operating Temperature -40°F to 180°F (-40°C to 82°C) with standard Buna-N seals. Mounting Panel mount or directly onto a valve actuator/positioner bracket.

More details >> Request a Quote >>
___fisher
FISHER™ YARWAY™ 25
Technical Parameters Parameter Specification Model Fisher Yarway 25 Type Thermodynamic (Disc) Steam Trap Operation Intermittent (Cycles open and closed) Body Material Forged Carbon Steel (Standard), Stainless Steel Internals Stainless Steel Disc and Seat Connection Screwed (NPT) Maximum Working Pressure Up to 600 psig (41 bar) Maximum Working Temperature Up to 800°F (427°C) Continuous Working Pressure Range 30 to 600 psig (2 to 41 bar)

More details >> Request a Quote >>
___fisher
FISHER™ 1080
Technical Parameters Parameter Specification Model Fisher 1080 Type Balanced, Cage-Guided, Flanged Globe Valve Trim Type Balanced Trim Flow Characteristic Linear, Equal Percentage (via different cages/plugs) End Connections Flanged (ANSI Class 150, 300, 600, 900) Body Materials Carbon Steel (WCB), Stainless Steel (CF8, CF8M), Alloy Steel Trim Materials Stainless Steel (Standard), hardened materials available for severe service. Temperature Range -450°F to 1100°F (-268°C to 593°C) with special designs and materials. Pressure Rating ANSI Class 150: 275 psig (19 bar) ANSI Class 300: 720 psig (50 bar) ANSI Class 600: 1440 psig (99 bar) ANSI Class 900: 2160 psig (149 bar) Leakage Class ANSI Class IV (Standard), ANSI Class V & VI options available. Sizes (Pipe Size) 1" to 12" (DN 25 to DN 300)

More details >> Request a Quote >>
___fisher
FISHER™ VEE-BALL™ V150
Technical Parameters Parameter Specification Model Fisher Vee-Ball V150 Type Rotary V-Notch Ball Control Valve Flow Characteristic Equal Percentage (inherent from the V-notch profile) Shut-Off Class ANSI Class VI (Bubble-tight) with standard non-metallic seats. End Connections Flanged (ANSI Class 150 & 300) Body Materials Ductile Iron, Carbon Steel (WCB), Stainless Steel (CF8) Ball & Stem Material Stainless Steel (standard) Seat Material Reinforced PTFE (RPTFE), Ultra-High Molecular Weight Polyethylene (UHMW-PE) Temperature Range -40°F to 400°F (-40°C to 204°C) with standard polymeric seats. Pressure Rating ANSI Class 150: 275 psig (19 bar) ANSI Class 300: 720 psig (49.6 bar) Flow Capacity (Cv) Varies by size. Example (Class 150 Flanged, 6"): Cv ~ 1150 Sizes (Pipe Size) 1" to 12" (DN 25 to DN 300)

More details >> Request a Quote >>
___fisher
FISHER™ FIELDVUE™ DLC3020F
Technical Parameters Parameter Specification Model Fisher FIELDVUE DLC3020f Type Digital, Two-Wire Level Controller Communication Protocol Foundation Fieldbus H1 (31.25 kbit/s) Input Signal From compatible Fisher electronic or pneumatic (with I/P) level transmitters. Output Signal Digital setpoint/command via Fieldbus; also provides a 4-20 mA analog output signal for the control valve (via an internal I/P converter). Power Supply 9 to 32 V DC via the Fieldbus network. Control Function PID Control Algorithm (configurable) Function Blocks Contains standard Fieldbus function blocks (AI, PID, AO, etc.) for distributed control. Ambient Temperature Range -40°F to 185°F (-40°C to 85°C) Enclosure Rating NEMA 4X (IP66) Hazardous Area Approvals FM, CSA, ATEX, IECEx for Class I, Division 1 / Zone 1 hazardous locations. Mounting Field-mounted on a pipe stanchion or wall.

More details >> Request a Quote >>
___fisher
FISHER™ CAV4
Technical Parameters Parameter Specification Model Fisher CAV4 Type Constant Bleed Volume Booster / Relay Pressure Ratio 1:1 (Standard) Supply Pressure Range 20 to 100 psig (1.4 to 6.9 bar) Input & Output Signal Range Typically 3 to 15 psig (0.2 to 1.0 bar) or 3 to 27 psig (0.2 to 1.9 bar)，取决于弹簧范围。 Constant Bleed Rate Approximately 0.25 SCFM (0.42 m³/hr) at 20 psig supply. Flow Capacity (Cv) Approximately 1.4 Body Material Aluminum Connection Size 1/4" NPT (Input, Output, and Supply) Operating Temperature -40°F to 180°F (-40°C to 82°C) with standard Buna-N seals. Mounting Panel mount or directly onto a valve actuator/positioner bracket.

More details >> Request a Quote >>
___fisher
FISHER™ V280
Technical Parameters Parameter Specification Model Fisher V280 Vee-Ball Valve Type Severe Service Rotary V-Notch Ball Control Valve Flow Characteristic Equal Percentage Shut-Off Class ANSI Class VI (Bubble-tight) with standard non-metallic seats. End Connections Flanged (ANSI Class 150 & 300) Body Materials Carbon Steel (WCB), Stainless Steel (CF8, CF8M) Ball Material Stainless Steel with Hardened Coatings (e.g., chromium carbide) available for extreme abrasion. Stem Material Stainless Steel Seat Material Reinforced PTFE (RPTFE), Ultra-High Molecular Weight Polyethylene (UHMW-PE) Temperature Range -40°F to 400°F (-40°C to 204°C) with standard polymeric seats. Pressure Rating ANSI Class 150: 275 psig (19 bar) ANSI Class 300: 720 psig (49.6 bar) Flow Capacity (Cv) Varies by size. Example (Class 150 Flanged, 8"): Cv ~ 2050 Sizes (Pipe Size) 3" to 16" (DN 80 to DN 400)

More details >> Request a Quote >>
___fisher
FISHER™ 4200
Technical Parameters Parameter Specification Model Fisher 4200 Type Pneumatic Torque Tube Level Transmitter Measurement Principle Buoyancy (Torque Tube) Output Signal 3 to 15 psig (0.2 to 1.0 bar) Supply Air Pressure 20 psig (1.4 bar) minimum, typically 20-35 psig (1.4-2.4 bar) is supplied. Air Consumption Very low at steady state; typically < 0.1 SCFM (0.17 m³/hr). Mounting Top-mounted (suspended from the top of the vessel). Displacer Lengths Available in a wide range of standard lengths to match the required level measurement span. Process Connections Typically 2-inch or 3-inch NPT or 150# / 300# Flange. Body Materials Cast Steel, Carbon Steel, Stainless Steel Displacer & Torque Tube Stainless Steel (standard), Monel, and other alloys available for corrosive services. Temperature Limits Standard: -20°F to 450°F (-29°C to 232°C). High-Temp versions available up to 850°F (454°C). Pressure Rating Up to 3000 psig (207 bar) depending on model and torque tube rating.

More details >> Request a Quote >>
___fisher
FISHER™ G-SERIES
Technical Parameters Parameter Specification / Options Series Fisher G-Series Valve Type Globe Body, Angle Body Flow Characteristics Linear, Equal Percentage, Quick Opening End Connections Flanged (ANSI Class 150, 300, 600, 900, 1500, 2500), Butt-Weld, Screwed (NPT) Body Materials Carbon Steel (WCB), Stainless Steel (CF8/CF8M), Alloy Steel (WC6/WC9), Ductile Iron Size Range 1/2" to 24" (DN 15 to DN 600) Pressure Rating ANSI Class 150 to 2500 Temperature Range Standard: -50°F to 1000°F (-46°C to 538°C). Extended ranges available with special bonnets and packing. Leakage Class ANSI Class II, IV, V, VI (depends on trim design) Trim Types Micro-Form™ (Standard), Cage-Guided (Balanced & Unbalanced), Noise Abatement Trim, Anti-Cavitation Trim Actuator Types Fisher 657/667 Diaphragm Actuators (Spring-Return & Double-Acting), Piston Actuators

More details >> Request a Quote >>
___fisher
FISHER™ DSA
Technical Parameters Parameter Specification Model Fisher DSA Type Top-and-Bottom Guided, Single-Port Globe Valve Trim Type Unbalanced Flow Characteristic Linear, Equal Percentage End Connections Flanged (ANSI Class 1500, 2500); Butt-Weld Body Materials Forged Carbon Steel (A105), Cast Carbon Steel (WCB), Stainless Steel (CF8/CF8M) Size Range 1" to 8" (DN 25 to DN 200) Pressure Rating ANSI Class 1500: 3600 psig (248 bar) ANSI Class 2500: 6000 psig (414 bar) Temperature Range -450°F to 1200°F (-268°C to 649°C) Leakage Class ANSI Class IV (Standard)， ANSI Class V & VI

More details >> Request a Quote >>
1 2
···
566 567 568 569 570 571 572
···
5680 5681
Related products
DILM170C
The Eaton DILM170C is a heavy-duty AC power contactor designed for industrial motor control applications. As part of Eaton's DILM series, this contactor provides reliable switching performance for demanding electrical loads.
S2C-H6R
The ABB S2C-H6R is a 100 A, 3-pole, High Magnetic (H-type) Moulded Case Circuit Breaker (MCCB) from ABB's Form 2a (S2C series), also known as the Tmax series in certain markets. This specific model is engineered for applications requiring a high withstand and interrupting capacity for severe fault conditions.
FISHER™ LEVER-LOCK HANDLEVER ACTUATOR
Specifications: Type: Manual Quarter-Turn Actuator Operation: 90° rotation (quarter-turn) Mounting: Directly onto the standard mounting pad of Fisher and other compliant ball and plug valves. Position Indication: Clear Open/Closed indicators on the lever and base. Torque & Physical Data: Torque Output: The output torque is a function of the force applied by the operator and the length of the lever. It is designed to handle the typical breakaway and running torque of the valves it is mounted on. Lever Length: Varies by model to provide different levels of mechanical advantage. Common lengths are in the range of 10 to 24 inches (250 to 600 mm). Weight: Lightweight, typically a few kilograms/pounds, depending on size and material. Materials of Construction: Lever & Body: Ductile Iron (standard, coated for corrosion protection), Aluminum (lightweight, good for non-corrosive areas), or Stainless Steel (for highly corrosive environments). Locking Mechanism: Hardened Steel for durability and wear resistance. Hardware: Stainless Steel. Locking Features: Locking Positions: Open, Closed. Some models may allow locking in intermediate positions. Padlock Holes: Typically designed to accommodate up to three padlocks to comply with multi-person LOTO safety protocols. Compatible Valves: Fisher V100, V200, V300 Ball Valves Fisher A, AF, AP Plug Valves Other quarter-turn valves with ISO 5211 mounting pad standards.