Products
Products
home
Premium Quality PLC Control Component TRS 24VDC 1CO

The Weidmüller 1122770000, type TRS 24VDC 1CO, is a relay module from the TERMSERIES family . It is a complete, ready-to-use module consisting of a relay and a base, designed for DIN rail mounting .

open
TEL:+86 13600179521
Mail:info@easyautomationparts.com
info@easyautomationparts.com
WhatsApp
Parameters
Request a Quote
Return to List
Key Technical Parameters Parameter Specification Order No. 1122770000 Type TRS 24VDC 1CO Series TERMSERIES Version Relay module, 1 CO contact (AgNi), 24 V DC coil, 6 A, Screw connection Product Status Active Quantity per package 10 pc(s) Dimensions & Weight Parameter Specification Width 6.4 mm (0.252 inch) Height 89.6 mm (3.528 inch) Depth 87.8 mm (3.457 inch) Net weight 33 g Control Side (Coil) Parameter Specification Rated control voltage 24 V DC ±20 % Rated current DC 11.5 mA Rated power 280 mW Coil resistance 2.09 kOhms Must operate voltage 16 V DC Must release voltage 3 V DC Status indicator Green LED Protective circuit Free-wheeling diode, Reverse polarity protection Load Side (Contacts) Parameter Specification Contact type 1 CO (SPDT) - AgNi (Silver-Nickel) Rated switching voltage 250 V AC Max. switching voltage, AC 250 V Max. switching voltage, DC 250 V Continuous current 6 A Inrush current 20 A / 20 ms Max. AC switching capacity (resistive) 1500 VA Max. DC switching capacity (resistive) 144 W @ 24 V Min. switching power 1 mA @ 24 V, 10 mA @ 12 V, 100 mA @ 5 V Switch-on delay (operate time) ≤ 6 ms Switch-off delay (release time) ≤ 16 ms Max. switching frequency at rated load 0.1 Hz Mechanical service life 5 × 10⁶ switching cycles Insulation & Protection Parameter Specification Rated voltage 300 V Overvoltage category III Pollution severity 2 Protection degree IP20 Dielectric strength (coil to contacts) 4 kVeff / 1 min Impulse withstand voltage 6 kV (1.2/50 µs) Clearance & creepage (input-output) ≥ 6 mm Insulation type Reinforced insulation Connection Data Parameter Specification Connection type Screw connection Stripping length 8 mm Tightening torque 0.4 Nm Clamping range, min 0.14 mm² (AWG 26) Clamping range, max 2.5 mm² (AWG 14) Blade size 0.6 x 3.5 mm / PH0 Environmental & Compliance Parameter Specification Operating temperature -40 °C … +60 °C Storage temperature -40 °C … +85 °C Humidity 5 to 95% RH, non-condensing Flammability rating (housing) UL 94 V-0 Mounting rail TS 35 Test button available No Mechanical switch position indicator No RoHS status Compliant with exemption REACH SVHC Lead (7439-92-1) Certifications cULus (E141197), DNV (TAA00001E5), CE, EAC