Key Technical Parameters Parameter Specification Type PRO BAS 30W 5V 6A Product Status Active Dimensions & Weight Parameter Specification Width 36 mm (1.417 inch) Height 90 mm (3.543 inch) Depth 85 mm (3.346 inch) Net weight 245 g Input Specifications Parameter Specification Rated Input Voltage 110...240 V AC / 120...340 V DC AC Input Voltage Range 85…264 V AC (derating below 100 V AC) DC Input Voltage Range 110…370 V DC (derating below 120 V DC) Frequency Range AC 45…65 Hz AC Current Consumption (typ.) 0.56 A @ 115 V AC / 0.34 A @ 230 V AC Inrush Current (max.) 40 A @ 230 V AC, 25 °C Recommended Back-up Fuse 2 A safety fuse / 6 A Char. B circuit breaker Internal Input Fuse Yes Surge Protection Varistor Connection System Screw connection Output Specifications Parameter Specification Rated Output Voltage 5 V DC ± 1% Output Voltage Range 3…8 V DC (adjustable via potentiometer) Output Power 30 W Rated Output Current 6 A @ 55 °C Output Current (Derated) 3.75 A @ 70 °C Residual Ripple ≤ 50 mVpp @ full load Capacitive Load 5.5 mF max Efficiency (typ.) 87% @ 230 V AC AC Failure Bridging Time > 80 ms @ 230 V AC / > 20 ms @ 115 V AC Parallel Connection Option Yes, max. 3 units Reverse Polarity Protection Yes Connection System Screw connection Output Terminals 4 (++ / --) General Specifications Parameter Specification Housing Material Plastic, protective insulation (Protection Class II) Protection Degree IP20 Protection Class II Operating Temperature -25 °C … +70 °C Storage Temperature -40 °C … +85 °C Start-up Temperature ≥ -40 °C Humidity 5…95% (non-condensing) Power Loss (nominal load) 3.9 W Power Loss (idling) 0.5 W Power Factor (approx.) 0.45 @ 120/230 V AC MTBF (at 40°C / 230 V AC) ≥ 1,200,000 h acc. to SN 29500 Pollution Severity 2 Insulation Voltage (Input/Output) 3.5 kV Overvoltage Category II Connection Data (Input) Parameter Specification Connection System Screw connection Solid wire (min-max) 0.5…6 mm² (AWG 26…12) Flexible wire (min-max) 0.5…6 mm² (AWG 26…12) Tightening torque 0.5…0.6 Nm Screwdriver blade 0.6 x 3.5 mm Number of terminals 2 (L/N) Connection Data (Output) Parameter Specification Connection System Screw connection Solid wire (min-max) 0.5…6 mm² (AWG 26…12) Flexible wire (min-max) 0.5…6 mm² (AWG 26…12) Tightening torque 0.5…0.6 Nm Screwdriver blade 0.6 x 3.5 mm Number of terminals 4 (++ / --) Signaling & Diagnostics Parameter Specification Status indication Green LED LED green Output voltage OK (Uout > 0.9 x Unominal) Floating contact No Environmental & Compliance Parameter Specification Noise emission (EN55032) Class B Shock resistance (IEC 60068-2-27) 30 g in all directions Vibration resistance (IEC 60068-2-6) 0.7 g Standards SELV (IEC 61010-1), PELV (IEC 61010-2-201), EN 61558-2-16 RoHS status Compliant with exemption (6c, 7a, 7cI) REACH SVHC Lead (7439-92-1), Lead monoxide (1317-36-8) Certifications cULus