Key Technical Parameters Parameter Specification Order No. 7760056329 Type DRI424024L Version D-SERIES DRI, 2 changeover (CO) contacts, AgSnO contact material, 24 V DC coil, Continuous current: 5 A, Flat blade connections (2.5 mm x 0.5 mm) GTIN (EAN) 6944169740343 Quantity per package 20 pc(s) Dimensions & Weight Parameter Specification Width 13 mm (0.512 inch) Height 31 mm (1.22 inch) Depth 28 mm (1.102 inch) Net weight 19 g Control Side (Coil) Parameter Specification Rated control voltage 24 V DC Rated current DC 21.8 mA Rated power 530 mW Coil resistance 1100 Ω ± 10 % Pull-in voltage, typ. 18 V DC Drop-out voltage, typ. 3.6 V DC Status indicator Green LED Load Side (Contacts) Parameter Specification Contact type 2 changeover (DPDT) - AgSnO (silver-tin oxide) Rated switching voltage 250 V AC Max. switching voltage, AC 250 V Max. switching voltage, DC 250 V Continuous current 5 A Max. AC switching capacity (resistive) 1250 VA Max. DC switching capacity (resistive) 150 W @ 24 V Min. switching power 10 mA @ 24 V / 10 mA @ 12 V / 100 mA @ 5 V Switch-on delay ≤ 15 ms Switch-off delay ≤ 10 ms Max. switching frequency at rated load 0.1 Hz Mechanical service life 10 × 10⁶ switching cycles Insulation & Protection Parameter Specification Rated voltage (UL) 300 V Overvoltage category III Pollution severity 2 Protection degree IP20 Dielectric strength (coil to contacts) 5 kVeff / 1 min Dielectric strength (adjacent contacts) 1.5 kVeff / 1 min Impulse withstand voltage 5 kV (1.2/50 µs) Clearance & creepage (coil to contacts) ≥ 4 mm Environmental & Compliance Parameter Specification Operating temperature -40 °C…+55 °C Storage temperature -40 °C…+85 °C Humidity 35...85 % RH, non-condensing Flammability rating (cover) UL 94 V-2 Flammability rating (baseplate) UL 94 V-0 RoHS status Compliant without exemption REACH SVHC No SVHC above 0.1 wt% Certifications cURus (E312083), IEC 61810-1, EN 60664-1