Key Technical Parameters Parameter Specification Type PRO TOP3 240W 24V 10A Product Status Active Dimensions & Weight Parameter Specification Width 50 mm (1.969 inch) Height 130 mm (5.118 inch) Depth 125 mm (4.921 inch) Net weight 1,120 g Input Specifications Parameter Specification Rated Input Voltage 3x 400...3x 500 V AC (wide-range input) AC Input Voltage Range 3 x 320...3 x 575 V AC / 2 x 360...2 x 575 V AC DC Input Voltage Range 450...800 V DC Frequency Range AC 45…65 Hz AC Current Consumption (typ.) 0.8 A @ 320 V AC DC Current Consumption (typ.) 0.7 A @ 400 V DC Inrush Current (max.) 10 A Nominal Power Consumption 258.1 VA Recommended Back-up Fuse 2 - 3 A, Char. C Internal Input Fuse No Surge Protection Varistor Connection System (Input) PUSH IN with actuator Output Specifications Parameter Specification Rated Output Voltage 24 V DC ± 1% Output Voltage Range 22.5 … 28.8 V DC (adjustable) Output Power 240 W Rated Output Current 10 A @ 60 °C DCL - Peak Load Reserve (150%) 15 A for 5 s DCL - Peak Load Reserve (600%) 60 A for 15 ms Residual Ripple < 50 mVpp @ rated load Rise Time ≤ 100 ms AC Failure Bridging Time > 20 ms @ 230/115 V AC Parallel Connection Option Yes, max. 10 units (with ORing MOSFET) Reverse Polarity Protection Yes Connection System (Output) PUSH IN with actuator General Specifications Parameter Specification Efficiency (typ.) 93% Power Loss (nominal load) - Power Loss (idling) - MTBF (at 25°C / 400 V AC) ≥ 1,400,000 h (acc. to SN 29500) MTBF (at 40°C / 400 V AC) ≥ 654,000 h (acc. to SN 29500) Protection Class I (with PE connection) Protection Degree IP20 Overvoltage Category III, II Pollution Severity 2 Isolation Voltage (Input/Output) 3.5 kV Conformal Coating No Power Factor (approx.) > 0.75 @ 3x400 V AC Environmental & Compliance Parameter Specification Operating Temperature -25 °C … +70 °C Storage Temperature -40 °C … +85 °C Derating > 60 °C (2.5% / 1 °C) Start-up Temperature ≥ -40 °C Humidity 5…95% (non-condensing) Shock Resistance 30 g (IEC 60068-2-27) Vibration Resistance 2.3 g (on DIN rail), 4 g (direct mounting) Noise Emission Class B (EN55032) Certifications cULus (E258476), cULusEX (E470829), DNV, ABS, BV, RINA, Lloyds Register Standards SELV (IEC 60950-1), PELV (EN 60204-1), EN 61558-2-16 RoHS Status Compliant with exemption REACH SVHC Lead (7439-92-1) Connection Data (Input) Parameter Specification Connection System PUSH IN with actuator Solid wire (min-max) 0.5…1.5 mm² (AWG 20…12) Flexible wire (min-max) 0.5…2.5 mm² Number of Terminals 4 for L1/L2/L3/PE Connection Data (Output) Parameter Specification Connection System PUSH IN with actuator Solid wire (min-max) 0.2…2.5 mm² (AWG 26…12) Flexible wire (min-max) 0.2…2.5 mm² Number of Terminals 5 (++ / ---) Connection Data (Signal) Parameter Specification Wire connection method PUSH IN Solid wire (min-max) 0.14…1.5 mm² (AWG 26…16) Flexible wire (min-max) 0.14…1.5 mm²