Key Technical Parameters General Ordering Data Parameter Value Order No. 1207700000 Type HDC HE 16 FS Product family RockStar® / HE Series Version HDC insert, Female Housing size Size 6 (for 16B housings) Colour Beige Packaging unit 1 pc(s) Dimensions and Weight Parameter Value Width 34 mm (1.339 inch) Height 35.2 mm (1.386 inch) Depth 84.5 mm (3.327 inch) Net weight 100 g Temperature Ratings Parameter Value Limit temperature -40 °C … +125 °C Electrical Ratings (DIN EN 61984) Parameter Value Rated current 16 A Rated voltage 500 V Rated impulse withstand voltage 6 kV Pollution severity 3 Contact resistance (volume resistance) ≤ 2 mΩ Insulation resistance ≥ 10¹⁰ Ω UL/CSA Ratings Parameter Value Rated voltage (UL/CSA) 600 V AC/DC Rated current (cUR) - AWG 12 19.7 A Rated current (cUR) - AWG 14 15 A Rated current (cUR) - AWG 16 11.3 A Rated current (cUR) - AWG 18 10.3 A Rated current (cUR) - AWG 20 8 A Rated current (UR) - AWG 14 15 A Rated current (UR) - AWG 16 10 A Rated current (UR) - AWG 18 7 A Rated current (UR) - AWG 20 5 A Pin Configuration Parameter Value Number of poles 16 Number of power contacts 16 Number of signal contacts 0 Number of rows 2 PE contact present Yes (16+PE) Connection Data (Signal/Power Contacts) Parameter Value Connection type Screw connection Conductor cross-section, min. 0.5 mm² (AWG 20) Conductor cross-section, max. 2.5 mm² (AWG 14) Solid wire, min. 0.5 mm² Solid wire, max. 2.5 mm² Flexible (stranded) wire, min. 0.5 mm² Flexible (stranded) wire, max. 2.5 mm² Flexible with ferrule, max. 2.5 mm² (DIN 46228/4) Stripping length 9 mm Clamping screw M 3 Tightening torque, min. 0.5 Nm Tightening torque, max. 0.55 Nm Screwdriver blade size (crosshead) PH1 Screwdriver blade size (slotted) SD 0.6 x 3.5 mm