Key Technical Parameters General Data Parameter Value Version TERMSERIES, Relay module Type TRZ 24VDC 2CO Order No. 1123610000 GTIN (EAN) 4032248905959 Quantity 10 pc(s) Contact type 2 changeover contacts (DPDT / 2 Form C) Contact material AgNi (Silver Nickel) Test button available No Mechanical switch position indicator No Colour Black Dimensions and Weight Parameter Value Width 12.8 mm (0.504 inch) Height 90.5 mm (3.563 inch) Depth 87.8 mm (3.457 inch) Net weight 55.8 g Control Side (Input) Parameter Value Rated control voltage 24 V DC ±20 % Rated current (DC) 20.5 mA Power rating 495 mW Status indicator Green LED Protective circuit Free-wheeling diode, Reverse polarity protection Replacement relay coil voltage 24 V DC Load Side (Output) Parameter Value Rated switching voltage 250 V AC Continuous current 8 A Max. switching voltage, AC 250 V Max. switching voltage, DC 250 V Max. AC switching capacity (resistive) 2000 VA Max. DC switching capacity (resistive) 192 W @ 24 V Inrush current 15 A / 4 s Switch-on delay ≤ 6 ms Switch-off delay < 18 ms Max. switching frequency at rated load 0.1 Hz Min. switching power 1 mA @ 24 V, 10 mA @ 10 V, 100 mA @ 5 V Mechanical service life 30 x 10⁶ switching cycles Connection Data (Tension-clamp / Spring Connection) Parameter Value Wire connection method Tension-clamp connection Stripping length 8 mm Clamping range, min. 0.14 mm² (AWG 26) Clamping range, max. 2.5 mm² (AWG 14) Solid wire (min/max) 0.14 mm² / 2.5 mm² Stranded wire with ferrule (max.) 1.5 mm² Screwdriver blade size 0.6 x 3.5 mm Insulation & Safety Parameter Value Rated voltage 300 V Pollution severity 2 Overvoltage category III Clearance and creepage (control-load) ≥ 6 mm Dielectric strength (control-load) 3.51 kVeff / 1 min (reinforced insulation) Dielectric strength (open contact) 1 kVeff / 1 min Dielectric strength to mounting rail 4 kVeff / 1 min Impulse withstand voltage 6 kV (1.2/50 µs) Protection degree IP20