Key Technical Parameters Parameter Specification Order No. 1820560000 Type WDU 95N/120N BL Version Feed-through terminal block, Screw connection, blue, 120 mm², 269 A, 1000 V GTIN (EAN) 4032248369614 Quantity per package 5 pc(s) Dimensions & Weight Parameter Specification Width 27 mm (1.063 inch) Height 91 mm (3.583 inch) Depth 90 mm (3.543 inch) Depth including DIN rail 91 mm Net weight 261.8 g Electrical Specifications (IEC) Parameter Specification Rated cross-section 120 mm² Rated voltage 1000 V Rated DC voltage 1000 V Rated current 269 A Current at maximum wires 290 A Rated impulse withstand voltage 8 kV Volume resistance 0.12 mΩ Power loss 8.61 W Pollution severity 3 Connection Data Parameter Specification Connection type Screw connection Number of connections 2 Clamping screw M 10 Stripping length 27 mm Tightening torque, min. 12 Nm Tightening torque, max. 20 Nm Blade size S6 (DIN 6911) Connection direction on side (horizontal) Clamping range, min. 16 mm² Clamping range, max. 150 mm² Wire Connection Cross-Sections Conductor Type Min Max Solid wire 16 mm² 16 mm² Stranded wire 16 mm² 150 mm² Flexible wire 16 mm² 120 mm² Fine-stranded with ferrule 16 mm² 95 mm² Twin wire-end ferrules 10 mm² 35 mm² AWG range 4 AWG 250 kcmil Material & Environmental Parameter Specification Material Wemid Colour Blue Flammability rating UL 94 V-0 Continuous operating temp., min. -60 °C Continuous operating temp., max. 130 °C Storage temperature -25 °C...55 °C Hazardous Location Ratings (ATEX/IECEx) Parameter Specification Explosion-tested version Yes Certificate No. (ATEX) DEMKO14ATEX1338U Certificate No. (IECEX) IECEXULD14.0005U Max. voltage (ATEX/IECEX) 880 V Current (ATEX/IECEX) 221 A Wire cross section max. (ATEX/IECEX) 120 mm² Marking EN 60079-7 Ex eb II C Gb Ex 2014/34/EU label II 2 G D UL/cURus Ratings Parameter Specification Certificate No. (UR) E60693 Wire size (UR) 4 AWG...250 kcmil Voltage (UR) 1000 V Current (UR) 228 A CSA Ratings Parameter Specification Certificate No. (CSA) 200039-1057876 Wire size (CSA) 4 AWG...0000 AWG Voltage (CSA) 1000 V Current (CSA) 220 A Mounting & Configuration Parameter Specification Mounting rail TS 35 Mounting type Snap-on End cover plate required No Open sides Closed Number of potentials 1 Number of levels 1 N-function Yes PE function No PEN function Yes Standards IEC 60947-7-1 RoHS status Compliant without exemption