Technical Parameters Basic Information Brand: Kollmorgen (Danaher Motion) Model No.: AKM22C-ANB2DA00 Motor Type: 3-Phase Permanent Magnet Synchronous Brushless Servo Motor Frame Size: AKM22, 58mm IEC standard flange Winding Code: C (High voltage winding, support 640 VDC bus) Feedback: ANB = 2-pole analog inductive resolver Shaft Code: 2 = Standard φ20mm keyed shaft, no shaft seal Connector Code: DA = Single angular rotatable hybrid i-tec SpeedTec connector (power + feedback integrated) Suffix 00: No shaft seal, no holding brake Pole Pairs: 3 Net Weight: 1.10 kg Electrical Performance (640VDC Bus) Rated Continuous Power (Pn): 0.57 kW Max Mechanical Speed: 8000 rpm Standstill Continuous Stall Torque (Mo): 0.84 N·m Rated Continuous Torque (Mn): 0.68 N·m Standstill RMS Current (Iorms): 1.39 Arms Peak Torque (Mmax): 2.10 N·m Peak RMS Current (Imax): 4.17 Arms Torque Constant (Kt): 0.60 N·m/Arms Back EMF Constant (Ke): 0.30 Vrms/(rad/s) Line-Line Winding Resistance (Rm @25°C): 11.8 Ω Line-Line Inductance (Lm): 3.75 mH Rotor Moment of Inertia (J): 0.0161 kg·cm² Electrical Time Constant: 0.32 ms Mechanical & Environmental Specifications Shaft Dimension: φ20mm keyed shaft, standard DIN keyway Protection Grade: IP65 housing/flange; shaft IP54 (no shaft seal) Insulation Class: Class F, maximum winding temperature 155°C Thermal Protection: Built-in PTC thermal sensor inside stator windings Operating Ambient Temperature: -20°C ~ +40°C Storage Temperature: -40°C ~ +85°C Vibration Standard: EN 60034-14 Mounting Standard: IEC IM B5 flange mounting, j6 pilot tolerance Bearing L10 Service Life: 20,000 hours under rated load Certifications: CE, UL Listed, EN60034-1, EN60034-5