Parameter Value Type PRO ECO 240W 24V 10A Order No. 1469490000 GTIN (EAN) 4050118275599 Version Power supply, switch-mode power supply unit, 24 V Quantity 1 pc(s) Product Status Will be discontinued (Last order date: 30.12.2026) Alternative Product 3025580000 (PRO ECO 240W 24V 10A II) Dimensions and Weight Parameter Value Width 60 mm (2.362 inch) Height 125 mm (4.921 inch) Depth 100 mm (3.937 inch) Net weight 1,002 g Input Data Parameter Value Rated input voltage 100...240 V AC (wide range input) AC input voltage range 85…264 V AC (derating at 100 V AC) DC input voltage range 80…370 V DC (derating at 120 V DC) Input frequency 47...63 Hz AC current consumption 1.23 A @ 230 V AC / 2.47 A @ 110 V AC DC current consumption 1.18 A @ 370 V DC / 2.4 A @ 120 V DC Inrush current (max.) 15 A Input fuse (internal) Yes Nominal power consumption 266.7 VA Power factor (approx.) > 0.94 @ 230 V AC / > 0.99 @ 115 V AC Surge protection Varistor Recommended back-up fuse 4 A (DIAZED fuse), 10 A Char. B circuit breaker, 3…4 A Char. C circuit breaker Output Data Parameter Value Rated output voltage 24 V DC ± 1 % Output voltage range 22...28 V DC (adjustable via potentiometer) Rated output current 10 A @ 55 °C Continuous output current 10 A @ 55 °C, 7.5 A @ 70 °C, 6.25 A @ 70 °C (current limiting) Output power 240 W Residual ripple < 50 mVpp @ 24 V DC, I额定 Rise time ≤ 100 ms AC failure bridging time > 20 ms @ 230 V AC / > 20 ms @ 115 V AC Capacitive load Unlimited Parallel connection option Yes, max. 5 units Reverse voltage protection Yes Overload protection Yes Short-circuit protection Yes (hiccup mode) Over-temperature protection Yes General Data Parameter Value Efficiency 90% Power loss, idling 2 W Power loss, nominal load 24 W Earth leakage current, max. 3.5 mA Housing version Metal, corrosion resistant Mounting DIN rail TS 35 Protection degree IP20 Surge voltage category II Pollution severity 2 MTBF > 500,000 h @ 40 °C (SN 29500) Operating altitude ≤ 3000 m Status Indication LED Color Condition Green LED Uoutput > 21.6 V DC (output voltage OK) Yellow LED Ioutput > 90% I额定 typ. (approaching current limit) Red LED Overload, overtemperature, short-circuit, or Uoutput < 20.4 V DC Signalling (Relay Contact) Parameter Value Floating contact Yes Relay on condition Output voltage > 21.6 V DC Relay off condition Output voltage < 20.4 V DC or overload Contact load (NO contact) max. 30 V DC / 1 A Environmental Data Parameter Value Operating temperature -25 °C ... +70 °C Storage temperature -40 °C ... +85 °C Permissible air humidity 5 %…95 % RH (non-condensing) Start-up temperature ≥ -40 °C Insulation and Safety Parameter Value Insulation voltage input/output 3 kV Insulation voltage input/earth 2 kV Insulation voltage output/earth 0.5 kV Protection class I, with PE connection Safety standards SELV (IEC 60950-1), PELV (EN 60204-1) Safety transformer standard EN 61558-2-16