E2E-X1R5D1-N Safety Light Curtain | F3SJ Series Industrial Safety Sensor

The E2E-X1R5D1-N is a shielded (flush mountable) inductive proximity sensor from Omron's E2E NEXT series. With an M8 stainless steel housing, this sensor is designed for installation in tight spaces where it can be embedded directly into metal without performance degradation .

open

TEL：+86 13600179521
Mail：info@easyautomationparts.com
info@easyautomationparts.com

Parameters

Request a Quote

Return to List

Specifications General & Performance Parameter Value Series E2E NEXT Sensing head size M8 Type Cylindrical, Shielded (Flush mountable) Sensing distance 1.5 mm ±10% Set distance 0 to 1.2 mm Hysteresis (Differential distance) 10% max. of sensing distance Detectable object Ferrous metal (Sensing distance decreases with non-ferrous metal) Standard sensing object Iron, 10 x 10 x 1 mm Response frequency 250 Hz Power source DC 2-wire models Electrical Specifications Parameter Value Power supply voltage (rated) 10 to 30 VDC Current consumption (leakage current) 0.8 mA max. Control output (Load current) 3 to 100 mA Residual voltage 3 V max. (at 100 mA load current, 2 m cable) Operation mode NO (Normally Open) Output type DC 2-wire (polarity) Protective circuits Surge suppressor, Load short-circuit protection Indicators Parameter Value Operation indicator High-luminance LED (visible from any angle across full 360° range) Environmental Specifications Parameter Value Ambient temperature (Operating) -25 to 70°C (with no icing or condensation) Ambient temperature (Storage) -40 to 85°C Ambient humidity (Operating/Storage) 35% to 95% RH (with no condensation) Temperature influence ±10% max. of sensing distance at 23°C over -25 to 70°C range Voltage influence ±1% max. of sensing distance within rated voltage range ±15% Degree of protection IP67, IP67G, IP69K