Specifications General & Performance Parameter Value Sensing head size 5.4 mm diameter Type Cylindrical, Shielded (Flush mount) Sensing distance 1 mm ±10% Setting distance 0 to 0.7 mm Hysteresis (Differential distance) 15% max. of sensing distance Sensing object Magnetic metals (ferrous) Standard sensing object Iron, 5.4 x 5.4 x 1 mm Response frequency 4 kHz Electrical Specifications Parameter Value Output type PNP open collector Operation mode NO (Normally Open) Switching capacity (Control output) 100 mA max. Power supply voltage 10 to 30 VDC (including ripple 10% p-p) Current consumption 10 mA max. Residual voltage 2 V max. (at 100 mA load current) Protective circuits Power supply reverse polarity protection, Output short-circuit protection, Surge absorption Indicators Parameter Value Operation indicator Yellow LED (lights when output is ON) Environmental & Mechanical Specifications Parameter Value Ambient temperature (Operating) -25 to 70°C (with no icing or condensation) Ambient temperature (Storage) -25 to 70°C Ambient humidity (Operating) 35% to 95% RH (with no condensation) Temperature influence ±15% max. of sensing distance at 23°C over -25 to +70°C range Voltage influence ±2.5% max. of sensing distance within rated voltage ±10% Insulation resistance 50 MΩ min. at 500 VDC Dielectric strength 500 VAC, 50/60 Hz for 1 min Vibration resistance 10 to 55 Hz, 1.5 mm double amplitude, 2 h each in X, Y, Z directions Shock resistance 500 m/s², 3 times each in X, Y, Z directions Degree of protection IP67 (IEC standard) Oil resistance Omron internal standard (oil-resistant) Physical Specifications Parameter Value Connection method Pre-wired (PVC cable) Cable length 2 m Cable specifications PVC, oil-resistant Overall length of sensor (housing) 25 mm Diameter 5.4 mm Material (Housing) Brass, nickel-plated Material (Sensing surface) Heat-resistant ABS resin Weight (packaged) Approx. 35 g