Technical Specifications Parameter Specification Detection Method TOF (Time of Flight) Detection Distance Range 50 mm to set distance (white/black paper 200 × 200 mm) Setting Range 50 to 900 mm (white paper 200 × 200 mm) Light Source (Wavelength) Infrared laser (940 nm) Class 1 (IEC/EN60825-1:2014) Spot Diameter (Reference) φ116 mm (at 900 mm distance) Output Type PNP open collector Output Operation Light-ON (output ON when light is received) Output Current Capacity 100 mA max. (DC26.4 V max., Class 2) Residual Voltage 1 V max. (load current <10 mA); 2 V max. (load current 10–100 mA) Response Time Operation/Reset: 100 ms max. Supply Voltage DC10 to 24 V (including ripple p-p 10%), Class 2 Current Consumption 20 mA max. Hysteresis Distance ≤18 mm (50–100 mm sensing distance); ≤20% of sensing distance (100–900 mm) Black/White Error ≤10% of set distance (at 900 mm setting) Distance Setting 1-point teaching method Protective Circuits Power supply reverse polarity protection, Output short-circuit protection, Output reverse polarity protection Degree of Protection IP65 (IEC 60529) Ambient Temperature (Operating) -20°C to 55°C (with no freezing or condensation) Ambient Temperature (Storage) -40°C to 70°C Ambient Humidity (Operating) 35% to 85% RH (with no condensation) Ambient Humidity (Storage) 35% to 95% RH Ambient Illuminance Sunlight: 10,000 lx max. Insulation Resistance 20 MΩ min. (at DC500 V megger) Dielectric Strength AC1000 V, 50/60 Hz for 1 min Vibration Resistance (Destruction) 10 to 55 Hz, 1.5 mm double amplitude for 2 hours each in X, Y, Z directions Shock Resistance (Destruction) 500 m/s², 3 times each in X, Y, Z directions Indicators Operation indicator (orange), Stability/Communication indicator (green) Connection Method Pre-wired cable (standard: 2 m) Housing Material ABS resin Lens Material PMMA Weight (Packed/Unit) Approx. 120 g / Approx. 65 g