Specifications Parameter Specification Sensing Method Diffuse-reflective Sensing Distance 700 mm (27.56 in) with white paper 200 x 200 mm Differential Distance 20% max. of sensing distance Light Source Infrared LED (940 nm) Output Type Relay output (SPDT - Single Pole Double Throw) Output Operation Light-ON / Dark-ON (selectable via built-in switch) Contact Capacity (Relay) 250 VAC, 3 A (cosφ = 1) max.; 5 VDC, 10 mA min. Relay Life Expectancy Electrical: 100,000 operations min. (1,800 ops/hr); Mechanical: 50,000,000 operations min. (18,000 ops/hr) Timer Function Selectable: ON-delay, OFF-delay, or One-shot delay; 0.1 to 5 s adjustable Response Time Operate or reset: 30 ms max. Supply Voltage 100 to 240 VAC ±10%, 50/60 Hz; 24 to 240 VDC ±10%, ripple (p-p) 10% max. Power Consumption 2 W max. Sensitivity Setting Single-turn adjustment Connection Method Terminal block Degree of Protection IP66 (IEC 60529) Insulation Resistance 20 MΩ min. at 500 VDC Dielectric Strength 2,000 VAC, 50/60 Hz for 1 min Vibration Resistance (Destruction) 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions Shock Resistance (Destruction) 500 m/s², 3 times each in X, Y, and Z directions Ambient Temperature (Operating) -25°C to 55°C (with no freezing or condensation) Ambient Temperature (Storage) -30°C to 70°C Ambient Humidity (Operating) 45% to 85% (with no condensation) Ambient Illuminance Incandescent lamp: 3,000 lx max. Indicator Operation indicator (red LED) Material (Case) ABS (Acrylonitrile Butadiene Styrene) Material (Lens) Methacrylate resin Material (Cover) Polycarbonate Weight (Packed) Approx. 160 g