Key Specifications Parameter Value/Description Series SYSDRIVE MX2 Rated Power 1.5 kW (2 HP) Input Voltage / Phase Single-phase 200 – 240 VAC, 50/60 Hz Output Voltage 3-phase, 200 – 240 VAC (output cannot exceed input voltage) Rated Output Current 8.0 A Rated Output Capacity Information not available in search results Frequency Range 0.1 – 580 Hz (up to 1000 Hz with restrictions) Control Type Current Vector Control, Sensorless Vector Control, V/f control Starting Torque 200% at 0.5 Hz (Open Loop Vector Control) Overload Tolerance (Heavy Duty) 150% of rated output current for 1 minute Overload Tolerance (Variable Torque) 120% of rated output current for 1 minute Carrier Frequency 2 – 15 kHz (adjustable for silent operation) Braking Built-in braking transistor (external braking resistor required, sold separately) Built-in Communication RS485 (Modbus RTU) Optional Fieldbus EtherCAT, CompoNet, DeviceNet (via optional communication units) Programming Drive Programming (flow-chart or text-based) Positioning Function Built-in positioning with up to 8 preset positions and homing function; no external PLC required Safety Features STO (Safe Torque Off), compliant with EN ISO13849-1:2008 (Cat.3/PLd) and IEC60204-1 stop category 0 Motor Compatibility Induction Motor (IM) and Permanent Magnet (PM) motor control PC Interface USB port for programming via CX-Drive software Cooling Method Forced-air cooling (internal fan) Enclosure Rating IP00 (open-type) Weight 1.9 kg (approx. 4.2 lbs) Dimensions (W × H × D) 108 × 128 × 170.5 mm Terminal Screw Size M4 Standard Wire Size 1.25 – 2.0 mm² (approx. 14 AWG) Compliance CE, cULus, RoHS compliant