Key Specifications Parameter Value/Description Series SYSDRIVE MX2 Rated Power (Constant Torque) 0.75 kW (1 HP) Rated Power (Variable Torque) 1.1 kW (1.5 HP) Input Voltage / Phase Single-phase 200 – 240 VAC, 50/60 Hz Output Voltage 3-phase, 200 – 240 VAC (proportional to input voltage) Rated Output Current (Constant Torque) 5.0 A Rated Output Current (Variable Torque) 6.0 A Rated Output Capacity (CT) 1.7 kVA at 200V / 2.0 kVA at 240V Rated Output Capacity (VT) 2.0 kVA at 200V / 2.4 kVA at 240V Frequency Range 0.1 – 400 Hz (standard), up to 580-1000 Hz max Control Type Current Vector Control, Sensorless Vector Control, V/f control Starting Torque 200% at 0.5 Hz Overload Tolerance (CT) 150% for 1 minute Overload Tolerance (VT) 120% for 1 minute Acceleration/Deceleration Time 0.01 – 3600 seconds Braking Built-in braking transistor Braking Torque (Capacitor Feedback) 100% at <50 Hz; 50% at <60 Hz Built-in Communication RS485 (Modbus RTU) Optional Fieldbus DeviceNet, Profibus, CompoNet, EtherCAT, ML-II (MECHATROLINK-II), EtherNet/IP Programming Drive Programming (built-in logic programming, flow-chart based) Positioning Functionality Built-in positioning with up to 8 preset positions Safety Features STO (Safe Torque Off), compliant with ISO13849-1 (double input circuit + EDM output) Motor Compatibility Induction Motor (IM) and Permanent Magnet (PM) motor control PC Interface USB port (mini-B) for programming via CX-Drive software Backup Supply 24 VDC backup supply for control board PID Control Built-in PID controller Digital Inputs 7 Analog Inputs 1 Digital Outputs 2 Relay Output 1 Ambient Temperature -10°C to 50°C Storage Temperature -20°C to 65°C Cooling Method Forced-air cooling (internal fan) Enclosure Rating IP20 Weight Approx. 1.4 – 1.76 kg (3.1 – 3.9 lbs) Dimensions (W × H × D) 108 × 128 × 170.5 mm Terminal Screw Size M4 Protections Overcurrent (OCP), Overvoltage (OVP), Overheating (OTP), Short Circuit (SCP), Brown-out (BOP) Compliance CE, cULus, RoHS