Key Specifications Parameter Specification Model TL-N10MY1 Type Inductive Proximity Sensor Shape Rectangular / Square Shielding Unshielded (Non-shielded) Output Configuration AC 2-wire Operation Mode NO (Normally Open) Detection Specifications Parameter Specification Sensing Distance 10 mm ±10% Setting Distance 0 to 8 mm Differential Travel (Hysteresis) 15% max. of sensing distance Standard Sensing Object Iron 40×40×1 mm Detectable Object Ferrous metals (distance reduces for non-ferrous metals) Response Frequency 10 Hz (Average value) Electrical Specifications Parameter Specification Power Supply Voltage 100 to 220 VAC (50/60 Hz) Operating Voltage Range 90 to 250 VAC Control Output (Load Current) 10 to 200 mA Leakage Current 0.8 mA max. Residual Voltage 5 V max. (at 200 mA load) Protective Circuits Surge suppressor Indicator Operation indicator (Red LED) Environmental & Physical Specifications Parameter Specification Degree of Protection IP67 (IEC 60529) - Dust-tight and water-resistant Oil Resistance Meets Omron standard: Oil-proof Ambient Temperature (Operating) -25 to 70°C (no icing) Ambient Humidity (Operating) 35% to 95% RH (no condensation) Temperature Influence ±10% max. of sensing distance (-25 to 70°C range) Voltage Influence ±1% max. of sensing distance (rated voltage ±10% range) Insulation Resistance 50 MΩ min. at 500 VDC Dielectric Strength 2,000 VAC 50/60 Hz for 1 min Vibration Resistance 10 to 55 Hz, 1.5 mm double amplitude, 2 hours each in X/Y/Z Shock Resistance 500 m/s², 10 times each in X/Y/Z Connection Method Pre-wired cable (2m or 5m lengths available) Cable Specifications PVC-insulated round cord, φ6, 2-core Dimensions (W × H × D) 30 mm × 30.5 mm × 52.5 mm Housing Material Heat-resistant ABS resin Sensing Surface Material Heat-resistant ABS resin Weight (Packed) Approx. 240 g