Key Specifications Parameter Specification Model TL-Q2MC1 Type Inductive Proximity Sensor / Square Type Shielding Unshielded (Non-shielded) Output Type NPN (Open Collector) Operation Mode NO (Normally Open) Detection Specifications Parameter Specification Sensing Distance 2 mm ±15% Setting Distance 0 to 1.5 mm Differential Travel (Hysteresis) 10% max. of sensing distance Standard Sensing Object Iron 8×8×1 mm Detectable Object Ferrous metals (sensitivity reduces for non-ferrous metals) Response Frequency 500 Hz (Average value) Electrical Specifications Parameter Specification Power Supply Voltage 12 to 24 VDC (ripple p-p 10% max.) Operating Voltage Range 10 to 30 VDC Current Consumption 15 mA max. (at 24 VDC, no load) Control Output (Switching Capacity) 100 mA max. (30 VDC max.) Residual Voltage 1 V max. (Load current 100 mA with cable length of 2 m) Protective Circuits Reverse polarity protection, Surge suppressor Indicator Detection indicator (Red) Environmental & Physical Specifications Parameter Specification Degree of Protection IP67 (IEC 60529) - Dust-tight and waterproof Ambient Temperature (Operating) -10 to 60°C Ambient Humidity (Operating) 35% to 95% Temperature Influence ±10% max. of sensing distance at 23°C in the range -10 to 60°C Voltage Influence ±2.5% max. of sensing distance at rated voltage in ±10% range Vibration Resistance 10 to 55 Hz, 1.5 mm double amplitude, 2 hours each in X, Y, Z Shock Resistance 1000 m/s², 10 times each in X, Y, Z Insulation Resistance 50 MΩ min. at 500 VDC Dielectric Strength 1,000 VAC 50/60 Hz for 1 min Connection Method Pre-wired cable (standard length 2 m or 5 m) Cable Specifications PVC-insulated round cord, φ2.9, 3-core Head Size (W×H×D) 9×8×28 mm Housing Material Heat-resistant ABS resin Sensing Surface Material Heat-resistant ABS resin Weight (Packed) Approx. 60 g