FISHER™ EASY-E™
Key Specifications & Parameters
Parameter Specification
Model Series easy-e™ (Comprises a valve body and a 1055/1065 size diaphragm actuator)
Valve Type Balanced, Cage-Guided Globe Valve
Actuator Type Spring-and-Diaphragm, Field-Reversible (for Air-to-Open or Air-to-Close action)
Sizes 1/2 inch to 3 inches (DN 15 to DN 80)
End Connections Flanged: ANSI Class 150 & 300 RF (Standard)
Screwed (NPT): Available
Pressure Ratings ANSI Class: 150 & 300
Max. Shut-off Pressure (ΔP): Dependent on actuator size and spring range. Consult performance tables.
Temperature Range Standard: -20° to 400°F (-29° to 204°C)
Extended: -50° to 450°F (-46° to 232°C) with specialized packing.
Body Materials Standard: Carbon Steel (A216 WCB)
Common Options: Stainless Steel (CF8 / 304, CF8M / 316)
Trim Materials Standard Trim (Cage, Plug, Stem): 316 Stainless Steel
Seat Ring: 316 Stainless Steel
Soft Seat: PTFE (Teflon) for bubble-tight shut-off (ANSI Class VI).
Flow Characteristics Equal Percentage (Standard, via characterized cage)
Linear (Optional)
Note: Characteristic is changed by re-orienting the cage, not by replacing it.
Flow Capacity (Cv) Ranges from approximately 1.8 (for 1/2") to over 120 (for 3"), depending on the trim level.
Rangeability 50:1
Leakage Class ANSI Class VI (Bubble-tight) with standard PTFE soft seat.
Actuator Size: 1055 (for smaller valves) and 1065 (for larger valves)
Spring Ranges: Standard ranges (e.g., 3-15 psig, 6-30 psig, 9-45 psig).
Accessories Positioners: DVC6000 (Digital), 3582i (Pneumatic)
Limit Switches, Solenoid Valves, Air Sets, Fail-Safe Kits (for loss of air supply).
FISHER™ CT88
Key Parameters
Category Parameter Description / Typical Values
Enclosure Enclosure Material Cast Aluminum with Epoxy Powder Coat.
Ingress Protection IP66/IP67 (NEMA 4, 4X, 6 equivalent) - Dust-tight and protected against powerful water jets and temporary immersion.
Hazardous Area Certifications ATEX, IECEx (Ex d IIC T6 Gb / Ex tb IIIC T80°C Db), CSA (Class I, Div 1 & 2, Groups A, B, C, D).
Electrical Electrical Connections Modular terminal block for easy wiring.
Conduit Entries Multiple ½" NPT conduit entries.
Switch Types Standard: 2 to 4 snap-action switches (SPDT). Optional: Magnetic proximity switches (Reed switches), Hall Effect sensors.
Electrical Ratings Typical Switch: 10 A, 250/480 VAC. (Specific ratings depend on the switch type selected).
Mechanical Shaft Rotation Standard 90° adjustment (configurable for other angles).
Operating Temperature Standard: -40°F to +165°F (-40°C to +74°C). Optional high-temperature version available.
Mounting Directly mounts to the actuator using a standardized interface (e.g., Fisher V-Ball, V500/V600 actuator mounts).
Indication Position Indicator Mechanical Flag Indicator: Color-coded (Red/Green) for local visual position indication.
Optional Features • Potentiometer for analog position feedback.
• Heater Kit for cold environments to prevent condensation.
• Solenoid valves for integrated control.
OFAFC000GG63
The ABB OFAFC000GG63 is a low‑voltage HRC (High Rupturing Capacity) fuse link designed for use in industrial power distribution and control systems. It is part of ABB’s OFAFC series of DIN‑standard fuse links, engineered for reliable protection of electrical circuits against overcurrent conditions, including short circuits. The fuse link is intended to be used with compatible fuse holders and disconnect switches to protect motors, transformers, wiring, and other equipment.
home
