Industrial Automation Products | Easy Semiconductor Technology (Hong Kong) Limited

siemens

3SE5112-0CH80

The 3SE5112-0CH80 is an emergency stop pushbutton from Siemens' 3SE5 series, featuring a 60 mm mushroom head actuator with a push-to-activate, twist-to-release mechanism. It integrates 2 NO (normally open) and 2 NC (normally closed) contacts, rated for 10 A/250 V AC or 5 A/30 V DC, with a mechanical life exceeding 1 million operations.

More details >> Request a Quote >>

siemens

3SE2924-3AA20

The 3SE2924-3AA20 is a mechanical limit switch from Siemens' 3SE2 series, featuring a roller plunger actuator with a 30 mm horizontal roller. It provides 1 NO (normally open) and 1 NC (normally closed) contact, rated for 10 A/250 V AC or 5 A/30 V DC, with a mechanical life of ≥1 million operations.

More details >> Request a Quote >>

siemens

3RW3027-1BB04

The 3RW3027-1BB04 is a 3-phase AC soft starter from Siemens, designed for motors up to 15 kW at 400 V AC or 18.5 kW at 500 V AC. It supports voltage ranges of 380–480 V (for 15 kW) and 500–690 V (for 18.5 kW), with current ratings of 32 A (400 V) and 25 A (690 V).

More details >> Request a Quote >>

siemens

6ES72213BD300XB0

6ES72213BD300XB0 Brief English Description
The 6ES72213BD300XB0 is a 16-channel digital input module for Siemens SIMATIC S7-1200, designed for DC 24 V industrial applications. It supports sink/source input configurations with a voltage range of 11–30 V DC and 4 mA rated current at 24 V. Each channel features programmable filter times (0.2–12.8 ms) to reduce noise interference.

More details >> Request a Quote >>

siemens

6ES7972-0BA12-0XA0

The 6ES7972-0BA12-0XA0 is a PROFIBUS DP Fast Connect Sub-D plug (9-pin male) for Siemens S7-300/400 systems. It supports PROFIBUS DP/V0 communication at 9.6 kbps to 12 Mbps, featuring screwless Fast Connect termination for shielded 2-wire cables. An integrated switch enables network termination with 110–120 Ω resistance for end nodes.

More details >> Request a Quote >>

siemens

6ES7151-1AA06-0AB0

6ES7151-1AA06-0AB0 Brief English Description
The 6ES7151-1AA06-0AB0 is a PROFINET Interface Module for Siemens' ET 200SP distributed I/O system, designed to connect field devices to a PROFINET network. It supports PROFINET RT/IRT communication with two RJ45 ports (10/100 Mbps, switch function) and enables media redundancy via MRP.

More details >> Request a Quote >>

siemens

6EP3332-6SB00-0AY0

The 6EP3332-6SB00-0AY0 is a 3-phase 24 V DC/10 A (240 W) smart power supply from Siemens' SITOP series. It accepts 380–480 V AC input, offers adjustable output (21.6–28.8 V DC), and features up to 94% efficiency with active PFC.

More details >> Request a Quote >>

siemens

6EP1333-2BA20

The 6EP1333-2BA20 is a 24 V DC/10 A (240 W) switch-mode power supply from Siemens' SITOP PSU8200 series. It accepts 85–264 V AC (50/60 Hz) or 110–370 V DC input, with adjustable output voltage (21.6–28.8 V DC) and up to 92% efficiency.

More details >> Request a Quote >>

siemens

3SK1121-2CB41

The 3SK1121-2CB41 is a 24 V DC on-delay time relay from Siemens' 3SK11 series, offering adjustable timing from 0.1 to 30 seconds via a dial. It features 1 NO and 1 NC delayed contacts, each rated for 5 A/250 V AC or 5 A/30 V DC.

More details >> Request a Quote >>

siemens

3RV20111GA20

The 3RV2011-1GA20 is a 1-pole thermal-magnetic motor protection circuit breaker from Siemens' SIMATIC 3RV2 series. Rated at 1 A (adjustable 0.63–1 A) for 230 V AC (50/60 Hz), it combines thermal overload protection (delayed trip) with magnetic short-circuit protection (instantaneous trip), offering 6 kA breaking capacity at 230 V AC.

More details >> Request a Quote >>