The ABB OFAFC1GG200 is a high‑rupturing‑capacity (HRC) DIN‑type fuse link designed for overcurrent protection in low‑voltage electrical distribution systems. It is part of ABB’s OFAFC family of gG‑characteristic fuse links, used to protect power circuits, feeders, motors, and control equipment from overloads and short circuits. This compact fuse link fits into compatible DIN fuse holders or switch‑fuse disconnectors to provide reliable fault interruption.

The ABB PSR72‑600‑70 is a compact 3‑phase soft starter designed for smooth starting and stopping of three‑phase motors in industrial and commercial applications. It reduces mechanical stress and electrical inrush current by controlling the voltage applied to the motor during start‑up and shutdown. This soft starter is part of ABB’s PSR series, optimized for space‑efficient motor control installations where frequent starts and stops are required.

The ABB CM‑PFE is a three‑phase monitoring relay designed to continuously monitor the health of three‑phase power systems. It detects phase sequence (correct order of phases) and phase failure/phase loss in three‑phase supplies with a voltage range of 208 V to 440 V AC. When used in control panels or distribution systems, it helps protect motors, contactors, and other three‑phase equipment from damage due to incorrect phase order or missing phase(s). The device provides a single changeover (SPDT) output contact for signaling or control actions based on the phase conditions.

The ABB MP2‑11W is a 22 mm modular illuminated pushbutton operator designed for industrial control panels and automation systems. It features a flush white actuator that stays in the selected (pressed) position (maintained action). The unit is part of ABB’s modular pilot‑device range and is supplied without a contact block, allowing you to configure the electrical switching contacts to suit your specific control requirements. It’s built for reliable use in demanding environments and offers high ingress protection on the front panel.

The ABB CE4K1‑10R‑11 is a compact emergency stop pushbutton designed for industrial control panels, machinery interfaces, and safety circuits. It features a red mushroom‑style actuator with a key release mechanism, allowing the button to be reset only with a key after it is pressed. This prevents accidental resetting and enhances safety. The device is part of ABB’s Compact pilot‑device range and is suitable for environments that require durable, clear emergency stop control.

The ABB ASL16‑30‑01‑81 is a 3‑pole DC‑coil contactor designed to control power circuits and three‑phase motors in industrial and automation applications. This block‑type contactor features a low‑power DC coil suitable for direct PLC output control and includes an integrated auxiliary contact for control logic feedback or interlocking functions. It is built for reliable switching of moderate load currents while maintaining a compact footprint for panel assemblies.

The ABB A2N250 TMF250/2500 FF 3P is a 3‑pole molded case circuit breaker (MCCB) from ABB’s FORMULA series. It provides reliable electrical protection by automatically interrupting overloads and short‑circuit conditions in low‑voltage power distribution systems. This compact breaker is suitable for industrial and commercial control panels where space‑efficient yet robust circuit protection is required.

The ABB CR‑M024AC4 is a pluggable miniature interface relay designed for industrial and automation control systems. It plugs into a compatible ABB CR‑M socket and can be mounted on a standard DIN rail. Its purpose is to provide reliable electrical isolation and switching between a low‑power control signal and one or more output circuits, enabling control logic to operate external devices such as contactors, indicators, or other loads.

The ABB OHB65J6 is a pistol‑style operating handle designed as a manual actuator accessory for front‑operated switch disconnectors in industrial electrical installations. It provides a secure and ergonomic means to turn power disconnect switches ON or OFF from the front of an enclosure or panel. This handle enhances safety, usability, and compliance in industrial control and power distribution systems.

The ABB M2SS5‑11R is a 22 mm modular selector switch operator designed for industrial control panels and automation systems. It features a maintained 2‑position action with a red rotary knob and is part of ABB’s modular pilot‑device range. The unit is supplied as the operator only (no contact blocks included), allowing flexible configuration with desired contact combinations for specific control functions.