Products
Products
ABB Allen-Bradley ADEPT ALSTOM
All Categories
AMAT B&R BACHMANN BENTLY Bosch Rexroth BAILEY CUTLER-HAMMER DEIF DANAHER Enterasys Extreme EATON ELAU EMERSON EPRO FANUC servo motor FOXBORO GE HIMA Honeywell ICSTriplex IFM Kollmorgen SIEMENS Schneider WOODWARD YASKAWA Omron YOKOGAWA MOOG MOTOROLA NI RELIANCE Rexroth SEW-EURODRIVE TRICONEX Weidmueller Mitsubishi SICK FISHER
home
eaton
EASY-E4-DC-12RC1
Technical Parameters Parameter Specification Product Model EASY-E4-DC-12RC1 Product Family Eaton EASY-E4 Controller Type Micro-PLC (Programmable Logic Controller) Supply Voltage 24 V DC Integrated I/O Total: 20 I/O Points - 12x Digital Inputs (24 V DC, Sink/Source) - 8x Relay Outputs: • 6x Changeover Contacts (CO) • 2x Normally Open Contacts (NO) Relay Contact Rating - 6A @ 250V AC (for CO contacts) - 2A @ 250V AC (for NO contacts) Program Memory Typically ~4 KB (for EASY-E4 series) Data Memory Typically ~2 KB (for EASY-E4 series) Programming - EASY-SOFT PC Software - Direct Device Programming via built-in display and keys Programming Language Function Block Diagram (FBD) / Circuit Diagram style Real-Time Clock (RTC) Yes Communication - EASY-LINK (for networking multiple EASY controllers) - USB Port for programming (on specific variants) Display Backlit LCD for status, values, and diagnostics Mounting Standard 35 mm DIN rail Operating Temperature -25 °C to +55 °C (-13 °F to 131 °F) Relative Humidity 95% (non-condensing)

More details >> Request a Quote >>
eaton
EASY-E4-DC-12TC1
Technical Parameters Category Specification Product Model EASY-E4-DC-12TC1 Product Family Eaton EASY-E4 Controller Series Controller Type Micro PLC with Integrated Temperature Control Power Supply 24V DC Integrated I/O • 12x Digital Inputs (24V DC) • 8x Relay Outputs (6x CO + 2x NO) Relay Ratings • 6A @ 250V AC (CO contacts) • 2A @ 250V AC (NO contacts) Temperature Inputs 2 channels for thermocouple or RTD sensors Temperature Ranges -200°C to 1800°C (depending on sensor type) Control Algorithms • ON/OFF control • PID control • Heating/Cooling control Program Memory 4 KB Data Memory 2 KB Real-Time Clock Integrated Programming EASY-SOFT software or front panel Programming Language Function Block Diagram (FBD) Display Backlit LCD with status indicators Communication EASY-LINK network capability Mounting 35 mm DIN rail Operating Temperature -25°C to +55°C Protection Rating IP20 (for cabinet installation)

More details >> Request a Quote >>
eaton
FY-EM-T02-02
Technical Parameters Parameter Specification Product Model FY-EM-T02-02 Product Family Eaton F&F (Field & Function) Series Device Type Programmable Energy & Power Monitoring Relay Supply Voltage 24 - 240 V AC/DC (Wide Range, Auto-sensing) Measurement Inputs Voltage: Up to 480 V AC (via potential transformer) Current: 0-1A or 0-5A AC (via current transformer) Measurement Channels 2 independent channels Measured Parameters Voltage (V), Current (I), Active Power (kW), Apparent Power (kVA), Reactive Power (kvar), Power Factor (cos φ), Frequency (Hz), Energy (kWh, kvarh) Outputs 2x Changeover Relay Contacts (CO) - Rated Load: 6 A / 250 V AC Communication Interface RS-485 with Modbus RTU protocol Programming & Display - Front-face buttons and LCD display - Configuration software (e.g., Eaton SOFISYS) Primary Functions - Under/Over voltage & current monitoring - Power & Power Factor monitoring - Energy (kWh) metering & tariff control - Asymmetry & Phase Sequence monitoring - Timer & Threshold functions Mounting Standard 35 mm DIN rail Operating Temperature -25 °C to +55 °C (-13 °F to 131 °F) Safety Standards IEC/EN 61010-1, UL 508

More details >> Request a Quote >>
eaton
XIOC-8AI-12
Technical Parameters Parameter Specification Product Model XIOC-8AI-12 Compatible Systems Eaton XP, XR, and XC Series PLCs Module Type Analog Input Module Number of Channels 8 Input Type Voltage Input Range 0 to 10 V DC (Standard factory default; other ranges like ±10V may be configurable) Resolution 12-bit (or higher, depending on the specific PLC system's processing capabilities) Conversion Time Typically a few milliseconds per channel (varies based on the master PLC) Connection Method Removable screw terminal block Isolation Channel-to-Bus: Yes (Opto-coupled) Channel-to-Channel: Typically not isolated Power Supply Powered by the 5 V DC backplane of the PLC rack/base unit Status Indicators - RUN/PWR: Green LED (indicates operational status) - ERR: Red LED (indicates a fault) - Ix: Status LED per channel (may be present) Mounting Mounts onto the XP/XR/XC series base unit or rack Operating Temperature 0 °C to +55 °C (32 °F to 131 °F)

More details >> Request a Quote >>
eaton
XIOC-8DI
Technical Parameters Parameter Specification Product Model XIOC-8DI Compatible Systems Eaton XP, XR, and XC Series PLCs Module Type Digital Input Module Number of Channels 8 Input Type 24 V DC, Sink/Source (Universal) Nominal Input Voltage 24 V DC Rated Input Voltage "1" 15 V DC to 30 V DC Rated Input Voltage "0" -30 V DC to 5 V DC Input Current Typically 3-5 mA per input (at 24 V DC) Connection Method Removable screw terminal block Isolation Channel-to-Bus: Yes (Optically isolated) Power Supply Powered by the 5 V DC backplane of the PLC rack/base unit Status Indicators - RUN/PWR: Green LED (indicates operational status) - ERR: Red LED (indicates a fault) - INx: Green LED per channel (indicates input status) Mounting Mounts onto the XP/XR/XC series base unit or rack Operating Temperature 0 °C to +55 °C (32 °F to 131 °F) Standards CE, cULus, RoHS

More details >> Request a Quote >>
eaton
ERC3-DO-CB-A-V100BI
Technical Parameters Category Specification Product Model ERC3-DO-CB-A-V100BI Product Family Eaton ERC3 System Module Type Digital Output Communication Board Output Configuration 4 independent channels Output Type Relay contacts (Changeover) Contact Rating 16A @ 250V AC Load Type Resistive, inductive, lamp loads Control Voltage 230V AC (via main unit) - Communication KNX TP1 (Twisted Pair) Protocol KNX Standard Programming ETS (KNX Engineering Tool Software) Configuration Application program "A" Mounting DIN rail (within ERC3 enclosure) Operating Temperature -5°C to +45°C Storage Temperature -25°C to +70°C Relative Humidity ≤ 93% (non-condensing) Protection Class IP20 (when installed in enclosure) Standards Compliance KNX Standard, EN 50090, EN 60669-1 Electrical Characteristics Rated Impulse Voltage: 4kV Dielectric Strength: 2.5kV AC (50Hz) Insulation Resistance: >100MΩ Power Consumption: <1W (standby), <2W (active) Communication Features KNX Address: Individual and group addressing Telegram Rate: Up to 9600 bps Bus Connection: KNX red/grey terminal Configuration: Via ETS software Application Functions Lighting control (on/off, dimming) Blind/shutter control Heating control Ventilation control Signal functions

More details >> Request a Quote >>
eaton
NZM1-XA110-130AC/DC
Technical Parameters Parameter Specification Product Model NZM1-XA110-130AC/DC Product Family Eaton NZM1 Circuit Breaker Accessory Device Type Under-Voltage Release / Shunt Trip Release Rated Operational Voltage (Ue) 110 - 130 V AC/DC (Wide Range) Power Consumption Approx. 10 W / 20 VA (at moment of tripping) Mounting Position Can be mounted on either the left or right side of the NZM1 breaker Compatibility Designed for Eaton NZM1 Molded Case Circuit Breakers Function Remotely trips the circuit breaker when the control voltage is applied. Electrical Life Typically > 1000 operations (at rated voltage) Connection Via screw terminals on the accessory Standards IEC/EN 60947-2

More details >> Request a Quote >>
eaton
MATSG-630/3
Technical Parameters Parameter Specification Product Model MATSG-630/3 Product Family Eaton MATSG Automatic Transfer Switches Type 3-Pole Automatic Transfer Switch Rated Operational Current (Ie) 630 A Rated Insulation Voltage (Ui) 690 V AC Rated Operational Voltage (Ue) 400 V AC / 50 Hz Short-Circuit Withstand Typically 50 kA (Icw) according to IEC 60947-6-1 Utilization Category AC-33A (for motors or mixed loads) Mechanical Life Several thousand operations Electrical Life Typically 1000+ operations at rated current Control Voltage Standard options: 24 V DC, 110 V AC, 220 V AC Status Indication Source 1 ON, Source 2 ON, Intermediate (OFF) Position Standards & Certifications IEC/EN 60947-6-1, CE Marked

More details >> Request a Quote >>
eaton
MATSG-200/4
Technical Parameters Category Specification Product Model MATSG-200/4 Product Family Eaton MATSG Automatic Transfer Switch Series Rated Current 200A Number of Poles 4 Rated Operational Voltage 400V AC Rated Insulation Voltage 690V AC Rated Frequency 50/60 Hz Short-Time Withstand Current 10kA (1 second) Utilization Category AC-33A Mechanical Life 10,000 operations Electrical Life 1,000 operations at rated current Control Voltage 24V DC / 230V AC (depending on configuration) Operating Temperature -25°C to +70°C Storage Temperature -40°C to +85°C Relative Humidity 95% (non-condensing) Protection Degree IP20 (for enclosure mounting) Standards Compliance IEC 60947-6-1, CE

More details >> Request a Quote >>
eaton
MATSG-63/4
Technical Parameters Category Specification Product Model MATSG-63/4 Product Family Eaton MATSG Automatic Transfer Switch Series Rated Current 63A Number of Poles 4 Rated Operational Voltage 400V AC Rated Insulation Voltage 690V AC Rated Frequency 50/60 Hz Short-Time Withstand Current 6kA (1 second) Utilization Category AC-33A Mechanical Life 10,000 operations Electrical Life 1,000 operations at rated current Control Voltage 24V DC / 230V AC (depending on configuration) Operating Temperature -25°C to +70°C Storage Temperature -40°C to +85°C Relative Humidity 95% (non-condensing) Protection Degree IP20 (for enclosure mounting) Standards Compliance IEC 60947-6-1, CE

More details >> Request a Quote >>
1 2
···
483 484 485 486 487 488 489
···
5680 5681
Related products
SA533-H33/PRP
YokogawaSAI533-H33/PRP is a high precision analog output module for industrial automation control systems. It supports 4 to 20 mA current signal output, has HART communication capability, can work stably in harsh environments, and is widely used in petroleum, chemical, power and other industries.
ACS800-01-0050-5+D150+P901
Core Specifications
1. ACS800-01-0050-5 Drive Unit

Output Power: 37kW (50HP) at 200V

Output Current: 125A continuous

Input Voltage: 3-phase 200-240V AC (-15%/+10%)

Overload Capacity:

150% for 60 seconds

200% for 3 seconds

Control Technology: Direct Torque Control (DTC)

Efficiency: 97.6% at full load

Switching Frequency: 1-8kHz (adaptive)

2. D150 Braking Module

Continuous Braking Power: 55kW

Peak Capacity: 110kW (10% duty cycle)

Response Time: <1ms

Protection: Over-temperature monitoring with auto-derating

3. P901 Control Panel

7" sunlight-readable multi-touch display

16-language interface with technical terms

Integrated web server (HTTPS/SSL)

32GB industrial-grade SSD storage

Dual USB 3.0 ports (front/rear)

Key System Features
Performance Enhancements:
✔ Precision Control: ±0.03% speed accuracy
✔ Adaptive Braking: Automatic torque optimization
✔ Process Intelligence: Dual PID controllers with cross-coupling
✔ Energy Management: Regenerative power monitoring

Connectivity Suite:

Standard Interfaces:

PROFINET IRT (2 ports)

EtherNet/IP

OPC UA Pub/Sub

Optional Modules:

PROFIBUS DP-V2

BACnet MS/TP

Wireless LAN

Safety Systems:

Certified Safety:

SIL3/PL e (STO, SS1, SLS)

ISO 13849-1 compliant

Protection Features:

Motor insulation monitoring

Bearing current protection

Adaptive thermal management

Physical Specifications
Enclosure Rating: IP21 (NEMA 1)

Cooling System: Smart fan with dust detection

Dimensions: 400 × 800 × 300mm (W×H×D)

Weight: 42kg (complete system)

Noise Level: <62dB(A) at 1m
SIEMENS 39VIMCCN 16171-126/6 APACS VIM Voltage Input Module: Precision and Reliability in Industrial Automation -

The SIEMENS 39VIMCCN 16171-126/6 APACS VIM Voltage Input Module is designed for precise electrical signal conversion, ensuring accurate data acquisition in industrial automation systems.